Abstract:An area efficient multizone gradient-modulated guard ring (MGM-GR) edge termination technique is proposed, fabricated, and analyzed for 10-kV class silicon carbide devices without extra process steps or masks, which provides a better tradeoff between near ideal blocking capabilities and technological process complexity. The edge termination region is divided into multiple zones by employing MGM-GR technique, which forms a similar linearly graded doping profile to relieve the amount of electric field crowding at the periphery of the active area and achieve a maximum blocking voltage with wide tolerance to implantation dose. The proposed device shows not less than a 35% reduction in edge termination area in comparison with a conventional equally spaced ring at a breakdown voltage of 10 kV. Moreover, MGM-GR shows good tolerances to breakdown voltage for total implant dose and interface charges. With the application of MGM-GR technique to SiC MOSFET with a 100- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> -thick N <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−</sup> epilayer doped to <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$5 \times 10^{14}$ </tex-math></inline-formula> cm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$^{-3}$ </tex-math></inline-formula> , the measured breakdown voltage is 13.6 kV at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$10~\mu \text{A}$ </tex-math></inline-formula> . This voltage is nearly 95% of the theoretical value calculated for a 1-D structure. Simulated and measured characteristics show that MGM-GR structure is a candidate for an ultrahigh voltage power device to maximize power density and driving down system complexity.

(Invited) Three-Section Adjusted Field Limited Rings Applicable for SiC 2200V Power MOSFETs

Design and Characteristics of an Etching Field Limiting Ring for 10kv SiC Power Device

Design and optimization of linearly graded field limiting ring termination for high-voltage SiC diodes

Study and Optimization of Field Limiting Rings for 10kV SiC Insulated Gate Bipolar Transistor

Compact Trench Floating Field Rings Termination for 10kV+ Rated SiC n-IGBTs

Termination Design of 6.5kV SiC MOSFET with Epitaxial Current Spreading Layer

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

A Robust and Area-Efficient Guard Ring Edge Termination Technique for 4H-Sic Power MOSFETs

Investigation on 4H SiC MOSFET with Three-Section Edge Termination

Analysis of Single Event Response and Hardening Methods in 1.2 kV SiC Power MOSFET With Multicell and Termination Structure

Design and Implement of 10 Kv SiC JBS Based on Exponential Varying Field Limiting Rings

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Characteristic and Robustness of Trench Floating Limiting Rings for 4H-SiC Junction Barrier Schottky Rectifiers

4H-SiC Floating Island JBS with Multi-Layer Floating Field Ring Termination

Experimental and numerical analyses of high voltage 4H-SiC junction barrier Schottky rectifiers with linearly graded field limiting ring

1.2-Kv Planar SiC MOSFETs with Improved Short-Circuit Capability by Adding Plasma Spreading Layer

Impact of the Transition Region Between Active Area and Edge Termination on Electrical Performance of SiC MOSFET

Impact of Termination Region on Switching Loss for SiC MOSFET

Multizone Gradient-Modulated Guard Ring Technique for Ultrahigh Voltage 4H-SiC Devices With Increased Tolerances to Implantation Dose and Surface Charges

Electrical Characterization and Analysis of 4H-Sic Lateral MOSFET (LMOS) for High-Voltage Power Integrated Circuits

Novel High-Tolerance Termination with Resistive Field Plate for 600 V Super-Junction Vertical Double-Diffused MOSFET