Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Trench Termination with SiO2-Encapsulated Dielectric for Near-Ideal Breakdown Voltage in 4H-Sic Devices

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Sidewall-Implanted Trench Termination for 4H-SiC Devices With High Breakdown Voltage and Low Leakage Current

High-k Dielectric Assisted Trench Termination of the 4H-SiC Super Junction Device for Improved Avalanche Capability

Trench Field Plate Engineering for High Efficient Edge Termination of 1200 V-class SiC Devices

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

Analysis of trench termination in 4H-nSiC based power devices

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

4H-Sic Trench-gate MOSFET with JTE Termination

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

Compact Trench Floating Field Rings Termination for 10kV+ Rated SiC n-IGBTs

Multi-Step Junction Termination Extension Design and Simulation Study for 4H-Sic Schottky Barrier Diode

Normally-off trench JFET technology in 4H silicon carbide

4H-SiC trench gate MOSFETs with field plate termination

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

Design, Fabrication and Characterization of Mesa Combined with JTE Termination for High-Voltage 4h–sic PiN Diodes

Implantation-free SiC Thyristor with Single-Mask 3D Termination Near 10 Kv

Multiple P-Type SiC Micro-Island As Junction Termination Extension for 4H-Sic Schottky Barrier Diode

Characteristic and Robustness of Trench Floating Limiting Rings for 4H-SiC Junction Barrier Schottky Rectifiers