Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

4H-Sic Trench-gate MOSFET with JTE Termination

4H-SiC trench gate MOSFETs with field plate termination

Normally-off trench JFET technology in 4H silicon carbide

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

4H-SiC Trench MOSFET With Floating/Grounded Junction Barrier-controlled Gate Structure

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

Fabricating and TCAD Optimization for a SiC Trench MOSFET With Tilted P-Shielding Implantation and Integrated TJBS

A New 4H-SiC Trench MOSFET With Improved Reverse Conduction, Breakdown, and Switching Characteristics

A SiC Asymmetric Cell Trench MOSFET with Split Gate and Integrated p+-polySi/SiC Heterojunction Freewheeling Diode

4H-Sic Trench Gate Lateral MOSFET with Dual Source Trenches for Improved Performance and Reliability

A Novel SiC Trench MOSFET with Self-Aligned N-Type Ion Implantation Technique

An ultralow loss 4H-SiC double trenches MOSFET with integrated heterojunction diodes and split gate

4H-Sic Trench Gate Lateral MOSFET with Deep-Shallow Source Trench for Improved RESURF Dose Window and Reduced Oxide Field

4H-SiC Trench MOSFET with Integrated Heterojunction Diode for Optimizing Switching Performance

Trench Termination with SiO2-Encapsulated Dielectric for Near-Ideal Breakdown Voltage in 4H-Sic Devices

Trench MOS-gated power devices

A High Performance 4H-Sic Normally-off VJFET

A novel high-performance junctionless 4H-SiC trench MOSFET with improved switching characteristics

Termination Design of 6.5kV SiC MOSFET with Epitaxial Current Spreading Layer