Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

High-k Dielectric Assisted Trench Termination of the 4H-SiC Super Junction Device for Improved Avalanche Capability

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Sidewall-Implanted Trench Termination for 4H-SiC Devices With High Breakdown Voltage and Low Leakage Current

Trench Termination with SiO2-Encapsulated Dielectric for Near-Ideal Breakdown Voltage in 4H-Sic Devices

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

Theoretical Study of an Effective Field Plate Termination for SiC Devices Based on High-k Dielectrics

Simulation study on 4H–SiC power devices with high-k dielectric FP terminations

Improved Etched Multistep JTE for UHV SiC Power Devices

Etched Junction Termination Extension With Floating Guard Rings And Middle Rings For Ultrahigh-Voltage 4h-Sic Pin Diodes

Implantation-free SiC Thyristor with Single-Mask 3D Termination Near 10 Kv

Design and Optimization of Planar Mesa Termination for Diamond Schottky Barrier Diodes

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

An Improved Composite JTE Termination Technique for Ultrahigh Voltage 4H-Sic Power Devices

4H-Sic Trench-gate MOSFET with JTE Termination

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

A New Edge Termination Technique for High-Voltage Devices in 4H-Sic–multiple-floating-zone Junction Termination Extension

Analysis of trench termination in 4H-nSiC based power devices

Design of field-plate terminated 4H-SiC Schottky diodes using high-k dielectrics

Investigations of 4H‐SiC trench MOSFET with integrated high‐K deep trench and gate dielectric

Trench Field Plate Engineering for High Efficient Edge Termination of 1200 V-class SiC Devices