Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Theoretical Study of an Effective Field Plate Termination for SiC Devices Based on High-k Dielectrics

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

High-k dielectrics based field plate edge termination engineering in 4H-SiC Schottky diode

Impact of High-k Dielectrics on Breakdown Performances of SiC and Diamond Schottky Diodes

Ramp Oxide Termination Structure Using High-K Dielectrics for High Voltage Diamond Schottky Diodes

A Study of Oxide Reliability Limitation on Different Field Plate Based Termination Techniques for SiC Power Devices

Design of field-plate terminated 4H-SiC Schottky diodes using high-k dielectrics

Design and Optimization of Planar Mesa Termination for Diamond Schottky Barrier Diodes

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

Trench Field Plate Engineering for High Efficient Edge Termination of 1200 V-class SiC Devices

Simulation study on 4H–SiC power devices with high-k dielectric FP terminations

A comprehensive analysis of breakdown mechanisms in 4H-SiC MOSFET and JFET

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Termination Structures for Diamond Schottky Barrier Diodes

A numerical comparison between MOS control and junction control high voltage devices in SiC technology

High-k Dielectric Passivation for GaN Diode with a Field Plate Termination

Analysis of trench termination in 4H-nSiC based power devices

Analysis of Novel Packaging Techniques for High Power Electronics in SiC

Off - State Performances of Ideal Schottky Barrier Diodes (SBD) on Diamond and Silicon Carbide

Field Plate Engineering for GaN-based Schottky Barrier Diodes