Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

High-Performance 4H-Sic Junction Barrier Schottky Diodes with Double Resistive Termination Extensions

4.15 Kv / 4.6 Mω·cm2 4H-Sic Epi-refilled Super-Junction Schottky Diode with Ring Assisted Super-Junction Termination Extension

Design and Experimental Study of 4H-Sic Trenched Junction Barrier Schottky Diodes

High-Voltage Large-Current 4H-SiC JBS Diodes

Multi-Step Junction Termination Extension Design and Simulation Study for 4H-Sic Schottky Barrier Diode

High-temperature Electrical Characteristics of JBS-integrated 4H-Sic MOSFETs

1.4 3 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

Multiple P-Type SiC Micro-Island As Junction Termination Extension for 4H-Sic Schottky Barrier Diode

1.43 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Fabrication characteristics of 1.2kV SiC junction barrier schottky rectifiers with etched implant junction termination extension

1.2-kV Low-Barrier 4H-SiC JBS Diodes by Virtue of P-Implants Across Dead Field of Current Flow

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

Novel Design and Modelling of SiC Junction Barrier Schottky Diode with Improved Baliga FOM under High-temperature Applications

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

Study on Junction Termination Etching Techniques for 4H-SiC Schottky Barrier Diode

High Single-Event Burnout Resistance 4H-Sic Junction Barrier Schottky Diode

4.5kV SiC JBS diodes

Development of G10kv 4H-Sic SBD Junction Extension Termination

Simulation, Fabrication and Characterization of 4500v 4H-Sic Jbs Diode

Development of 400 V-tolerant Single-Event Effect Hardened 4H-SiC Schottky Diode with linear energy transfer upto 83.5 MeV·cm 2 /mg