Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Simulation, Fabrication and Characterization of 4500v 4H-Sic Jbs Diode

Simulation, fabrication and characterization of 6500V 4H-SiC JBS diode

Development of 10 Kv 4H-Sic JBS Diode with FGR Termination

4.5kV SiC JBS diodes

Fabrication and Application of 1.7KV SiC-Schottky Diodes

Development of 1000v Sic Jbs Diodes

4.15 Kv / 4.6 Mω·cm2 4H-Sic Epi-refilled Super-Junction Schottky Diode with Ring Assisted Super-Junction Termination Extension

High-Voltage Large-Current 4H-SiC JBS Diodes

Study on 2000V SiC JBS Diodes

3.3 Kv-Class 4H-Sic Epi-Refilled Super-Junction Diode with Repetitive Surge Current Robustness

Design, Fabrication and Characterization of Mesa Combined with JTE Termination for High-Voltage 4h–sic PiN Diodes

Design and Simulation of 600V 4H-Sic Superjunction JBS Diode

1.4 Kv 4H-Sic PiN Diode with a Robust Non-Uniform Floating Guard Ring Termination

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

Development of G10kv 4H-Sic SBD Junction Extension Termination

Simulation of 4H-SiC Trench Junction Barrier Schottky Diodes with High-k Dielectrics

1.4 3 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

1.43 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

Accurate modeling and parameter extraction for 6H-SiC Schottky barrier diodes (SBDs) with nearly ideal breakdown voltage

Fabrication and Characterization of Kilovolt p-Type SiC JBS Diodes With Enhanced Current Capability and Electroluminescence Phenomenon

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices