Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

4H-SiC Floating Island JBS with Multi-Layer Floating Field Ring Termination

The Impact of the Island Layout on the Performance of the 4H-Sic Floating Island Device

Multiple P-Type SiC Micro-Island As Junction Termination Extension for 4H-Sic Schottky Barrier Diode

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

High Temperature Characterization Of 4h-Sic Normally-On Vertical Jfets With Buried Gate And Buried Field Rings

Characteristic and Robustness of Trench Floating Limiting Rings for 4H-SiC Junction Barrier Schottky Rectifiers

Analytical Model and Optimization for SiC Floating Island Structure

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

2Kv SiC Floating Island SBD with N+ Buffer

Experimental Study and Characterization of an Ultrahigh-Voltage Ni/4H–SiC Junction Barrier Schottky Rectifier with Near Ideal Performances

A New Edge Termination Technique for High-Voltage Devices in 4H-Sic–multiple-floating-zone Junction Termination Extension

1.43 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

A comprehensive analysis of breakdown mechanisms in 4H-SiC MOSFET and JFET

1.4 3 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

Etched Junction Termination Extension With Floating Guard Rings And Middle Rings For Ultrahigh-Voltage 4h-Sic Pin Diodes

Multi-Step Junction Termination Extension Design and Simulation Study for 4H-Sic Schottky Barrier Diode

Experimental and numerical analyses of high voltage 4H-SiC junction barrier Schottky rectifiers with linearly graded field limiting ring

Simulation study on 4H–SiC power devices with high-k dielectric FP terminations

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

Analysis of Floating Limiting Rings Termination Under Repetitive Avalanche Current Stress for 4H-SiC JBS Rectifiers