Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Analysis of Floating Limiting Rings Termination Under Repetitive Avalanche Current Stress for 4H-SiC JBS Rectifiers

Characteristic and Robustness of Trench Floating Limiting Rings for 4H-SiC Junction Barrier Schottky Rectifiers

Experimental and numerical analyses of high voltage 4H-SiC junction barrier Schottky rectifiers with linearly graded field limiting ring

Ruggedness Analysis of 600V 4H-Sic JBS Diodes under Repetitive Avalanche Conditions

Off-state Avalanche Breakdown Induced Degradation in 20 V NLDMOS Devices

Breakdown Voltage Instability Mechanism on the Field Limiting Rings Edge Termination of Buried Layer Rectifier

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

4H-SiC Floating Island JBS with Multi-Layer Floating Field Ring Termination

Experimental Study and Characterization of an Ultrahigh-Voltage Ni/4H–SiC Junction Barrier Schottky Rectifier with Near Ideal Performances

A comprehensive analysis of breakdown mechanisms in 4H-SiC MOSFET and JFET

Design and optimization of linearly graded field limiting ring termination for high-voltage SiC diodes

Effects of proton radiation on field limiting ring edge terminations in 4H–SiC junction barrier Schottky diodes

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Study and Optimization of Field Limiting Rings for 10kV SiC Insulated Gate Bipolar Transistor

Simulation of reverse breakdown in planar P-N junctions

Single Pulse Avalanche Robustness and Analysis for 1200-V SiC Junction Barrier Schottky Diode

(Invited) Three-Section Adjusted Field Limited Rings Applicable for SiC 2200V Power MOSFETs

Investigation and Modeling of the Avalanche Failure Mechanism of 1.2-kV 4H-SiC JMOS

Design and Implement of 10 Kv SiC JBS Based on Exponential Varying Field Limiting Rings

Development of 10 Kv 4H-Sic JBS Diode with FGR Termination

Fabrication characteristics of 1.2kV SiC junction barrier schottky rectifiers with etched implant junction termination extension