Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Experimental and numerical analyses of high voltage 4H-SiC junction barrier Schottky rectifiers with linearly graded field limiting ring

Experimental Study and Characterization of an Ultrahigh-Voltage Ni/4H–SiC Junction Barrier Schottky Rectifier with Near Ideal Performances

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

Design and optimization of linearly graded field limiting ring termination for high-voltage SiC diodes

Characteristic and Robustness of Trench Floating Limiting Rings for 4H-SiC Junction Barrier Schottky Rectifiers

Fabrication characteristics of 1.2kV SiC junction barrier schottky rectifiers with etched implant junction termination extension

Analysis of Floating Limiting Rings Termination Under Repetitive Avalanche Current Stress for 4H-SiC JBS Rectifiers

1.4 3 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

High-Voltage Large-Current 4H-SiC JBS Diodes

Design and Experimental Study of 4H-Sic Trenched Junction Barrier Schottky Diodes

2.5mΩ·cm2, 1750V 4H-SiC Junction Barrier Schottky Diodes With Floating Guard Ring Termination Structure

Design and Implement of 10 Kv SiC JBS Based on Exponential Varying Field Limiting Rings

1.43 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

4.15 Kv / 4.6 Mω·cm2 4H-Sic Epi-refilled Super-Junction Schottky Diode with Ring Assisted Super-Junction Termination Extension

Electrical Characteristics of 10-Kv 4H-Sic MPS Rectifiers with High Schottky Barrier Height

Design and Fabrication of 1.2 kV/10A 4H-SiC Junction Barrier Schottky Diodes with High Current Density

1.2-kV Low-Barrier 4H-SiC JBS Diodes by Virtue of P-Implants Across Dead Field of Current Flow

4H-SiC Floating Island JBS with Multi-Layer Floating Field Ring Termination

A novel 4H-SiC pinched barrier rectifier