Abstract:A 1200V 4H-SiC lateral double-diffused MOSFET (LDMOS) featuring a lightly doped P-top layer at the source side, and a high-doped N-well layer arranged between the channel and P-top layer is proposed. In order to promote the simulation accuracy, Sentaurus Process Tool that can simulate the oxidation, ion implantation, annealing, diffusion, etc. is used for structure establishment in this letter. In the ON-state, the electric potential at the end of the channel can be modulated and lowered due to the existence of P-top layer. The P-top layer can shield the voltage from the drain side, which results in the reduced saturation current ( $text{I}_{text {dsat}}$ ), especially at high drain-source voltage ( $text{V}_{text {DS}}$ ). The introduction of the N-well layer ensures that the P-top layer has almost no impact on the linear current ( $text{I}_{text {dlin}}$ ). Compared with the conventional SiC LDMOS, the $text{I}_{text {dsat}}$ at $text{V}_{text {DS}},,=400text{V}$ of the proposed LDMOS decreases by 24.2% with no degradation in the $text{I}_{text {dlin}}$ and the OFF-state breakdown voltage (BV). Benefiting from the suppressed $text{I}_{text {dsat}}$ , the proposed SiC LDMOS achieves a ON-state BV 366V higher than that of the conventional SiC LDMOS at the gate-source voltage of 20V. Since the short-circuit capability of the SiC power devices is much sensitive to the $text{I}_{text {dsat}}$ -/tex-math>, the 24.2% reduction in $text{I}_{text {dsat}}$ can predict a considerable enhanced short-circuit capability. Simulation results show that the short-circuit withstand time can be improved by 105%.

Impact of the Transition Region Between Active Area and Edge Termination on Electrical Performance of SiC MOSFET

Impact of Termination Region on Switching Loss for SiC MOSFET

Analysis and Suppression for Crosstalk in SiC MOSFET Turn-off Transient

Investigation on the Degradation Mechanism for SiC Power MOSFETs Under Repetitive Switching Stress

Low Switching Loss and Increased Short-Circuit Capability Split-Gate SiC Trench MOSFET with p-type pillar

Termination Design of 6.5kV SiC MOSFET with Epitaxial Current Spreading Layer

Considerations for SiC Super Junction MOSFET: On-resistance, Gate Structure, and Oxide Shield

Experimental Comparison of a New 1.2 kV 4H-SiC Split-Gate MOSFET with Conventional SiC MOSFETs in Terms of Reliability Robustness

Design and Simulation on Improving the Reliability of Gate Oxide in SiC CDMOSFET

Over dV/dt Robustness of Switching Behavior of SiC MOSFET and a Novel Main Junction Region Design

Simulation Study of a Novel 4H-Sic Split Gate Double Trench MOSFET with Side Wall Gate

Challenges in SiC power MOSFET design

Investigation On Degradation Mechanism And Optimization For Sic Power Mosfets Under Long-Term Short-Circuit Stress

Investigation on 4H SiC MOSFET with Three-Section Edge Termination

A SiC Asymmetric Cell Trench MOSFET with Split Gate and Integrated p+-polySi/SiC Heterojunction Freewheeling Diode

Degradation Dependency Analysis and Modeling of 1700 V Planar-Gate SiC MOSFETs under Gate Switching Instability

Simulation Study of A 1200V 4H-SiC Lateral MOSFET With Reduced Saturation Current

A detailed simulation study of the performance of -silicon carbide MOSFETs and a comparison with their silicon counterparts

A Comparative Study of SiC MOSFETs with and Without Integrated SBD

Novel SiC Trench MOSFET with Improved Third-Quadrant Performance and Switching Speed

4H-Sic Trench Gate Lateral MOSFET with Dual Source Trenches for Improved Performance and Reliability