Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Design and Characteristics of an Etching Field Limiting Ring for 10kv SiC Power Device

Study and Optimization of Field Limiting Rings for 10kV SiC Insulated Gate Bipolar Transistor

Study of Surface Flashover and Breakdown Characteristics in Liquid Nitrogen for Sfcl Application

Design and Implement of 10 Kv SiC JBS Based on Exponential Varying Field Limiting Rings

Theoretical Study of an Effective Field Plate Termination for SiC Devices Based on High-k Dielectrics

Experimental and numerical analyses of high voltage 4H-SiC junction barrier Schottky rectifiers with linearly graded field limiting ring

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Termination Design of 6.5kV SiC MOSFET with Epitaxial Current Spreading Layer

Analysis of Single Event Response and Hardening Methods in 1.2 kV SiC Power MOSFET With Multicell and Termination Structure

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

Ultra-high voltage device termination using the 3D RESURF (super-junction) concept - experimental demonstration at 6.5 kV

Characteristic and Robustness of Trench Floating Limiting Rings for 4H-SiC Junction Barrier Schottky Rectifiers

Evaluation of Trench Oxide Protection Techniques on Ultra High Voltage (10 kV) 4H-SiC UMOSFETs

Trench Field Plate Engineering for High Efficient Edge Termination of 1200 V-class SiC Devices

Theoretical and Experimental Study of 13.4 kV/55 A SiC PiN Diodes with an Improved Trade-Off between Blocking Voltage and Differential On-Resistance

Simulation study on 4H–SiC power devices with high-k dielectric FP terminations

A Study of Oxide Reliability Limitation on Different Field Plate Based Termination Techniques for SiC Power Devices

Design of Fluorine-Ion-Based Junction Termination Extension for Vertical GaN Schottky Rectifier

Design Criteria of High-Voltage Lateral RESURF JFETs on 4H-Sic