Abstract:An area efficient multizone gradient-modulated guard ring (MGM-GR) edge termination technique is proposed, fabricated, and analyzed for 10-kV class silicon carbide devices without extra process steps or masks, which provides a better tradeoff between near ideal blocking capabilities and technological process complexity. The edge termination region is divided into multiple zones by employing MGM-GR technique, which forms a similar linearly graded doping profile to relieve the amount of electric field crowding at the periphery of the active area and achieve a maximum blocking voltage with wide tolerance to implantation dose. The proposed device shows not less than a 35% reduction in edge termination area in comparison with a conventional equally spaced ring at a breakdown voltage of 10 kV. Moreover, MGM-GR shows good tolerances to breakdown voltage for total implant dose and interface charges. With the application of MGM-GR technique to SiC MOSFET with a 100- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> -thick N <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−</sup> epilayer doped to <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$5 \times 10^{14}$ </tex-math></inline-formula> cm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$^{-3}$ </tex-math></inline-formula> , the measured breakdown voltage is 13.6 kV at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$10~\mu \text{A}$ </tex-math></inline-formula> . This voltage is nearly 95% of the theoretical value calculated for a 1-D structure. Simulated and measured characteristics show that MGM-GR structure is a candidate for an ultrahigh voltage power device to maximize power density and driving down system complexity.

Theoretical and Experimental Study of 13.4 kV/55 A SiC PiN Diodes with an Improved Trade-Off between Blocking Voltage and Differential On-Resistance

Experimental Study and Characterization of an Ultrahigh-Voltage Ni/4H–SiC Junction Barrier Schottky Rectifier with Near Ideal Performances

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

1.4 Kv 4H-Sic PiN Diode with a Robust Non-Uniform Floating Guard Ring Termination

4 700V SiC PiN Rectifier

Design, Fabrication and Characterization of Mesa Combined with JTE Termination for High-Voltage 4h–sic PiN Diodes

Design, Fabrication and Characterization of Ultra-High Voltage 4H-Sic MOSFET Transistors

Design and Experimental Study of 1.2kV 4H-SiC Merged PiN Schottky Diode

Multizone Gradient-Modulated Guard Ring Technique for Ultrahigh Voltage 4H-SiC Devices With Increased Tolerances to Implantation Dose and Surface Charges

A Novel High Power 4H-Sic Unipolar Diode with Advanced Performance

6.5 kV SiC PiN and JBS Diodes' Comparison in Hybrid and Full SiC Switch Topologies

Breaking the Theoretical Limit of SiC Unipolar Power Device - a Simulation Study

Low Ron,sp.diff and Ultra-high Voltage 4H-Sic N-Channel IGBTs with Carrier Lifetime Enhancement Process

Electrical Characterization and Analysis of 4H-Sic Lateral MOSFET (LMOS) for High-Voltage Power Integrated Circuits

Study on 2000V SiC JBS Diodes

Development of 3 300 V SiC SBD and Hybrid Power Module

1.43 Kv 4H-Sic Lateral Junction Barrier Schottky Diode with High BFOM (390 MW/cm2)

1.2Kv SiC Merged PiN Schottky Diode with Improved Surge Current Capability

Development Of 3.6 Kv 4h-Sic Pin Power Diodes

A Double-Sided Cooling 6.5kv SiC MOSFET Power Module with Insulation Enhancement Design

Design and Experimental Demonstration of 4H-SiC Lateral High-Voltage MOSFETs With Double-RESURFs Technology for Power ICs