Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Hybrid Junction Termination Consisting of a Variation Lateral Doping Structure and a Spiral Polysilicon Resistive Field Plate

A High-Performance and Low HCI Degradation LDMOS Device With a Hybrid Field Plate

Junction termination structure of transverse high-pressure power semiconductor device

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Field Plate-Adaptive Doping: A Novel Surface Electric Field Optimization Technique for SOI LDMOS With Gate Field Plate

Theoretical Study of an Effective Field Plate Termination for SiC Devices Based on High-k Dielectrics

Trench Field Plate Engineering for High Efficient Edge Termination of 1200 V-class SiC Devices

Design and experimental verification of a novel high-reliability variation of lateral doping (VLD) termination

Termination Design of 6.5kV SiC MOSFET with Epitaxial Current Spreading Layer

Novel Homogenization Field Technology in Lateral Power Devices

A Novel Junction Termination Technique with Excellent Cost-Performance and Extraordinary Anti-Charge-Deviation Ability

High Voltage SiC JBS Diodes with Multiple Zone Junction Termination Extension Using Single Etching Step

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

A High-k LDMOS Improved by Floating Field Plates for Enhanced Cost Performance and Robustness

Deep oxide trench termination structure for super-junction MOSFET

Linearly Graded Doping Drift Region: a Novel Lateral Voltage-Sustaining Layer Used for Improvement of RESURF LDMOS Transistor Performances

4H-SiC Floating Island JBS with Multi-Layer Floating Field Ring Termination

A Lateral Power P-Channel Trench MOSFET Improved by Variation Vertical Doping

Ultra-Low On-Resistance SiC LDMOS With Separated-Protected Trench Gates and Trench RESURF Technology

Analysis and Hardening of SEGR in Trench VDMOS with Termination Structure

A Study of Oxide Reliability Limitation on Different Field Plate Based Termination Techniques for SiC Power Devices