Abstract:This article investigates an improved 4H-SiC trench gate metal–oxide–semiconductor field-effect transistor (MOSFET) (UMOSFET) fitted with a super-junction (SJ) shielded region. The modified structure is composed of two n-type conductive pillars, three p-type conductive pillars, an oxide trench under the gate, and a light n-type current spreading layer (NCSL) under the p-body. The n-type conductive pillars and the light n-type current spreading layer provide two paths to and promote the diffusion of a transverse current in the epitaxial layer, thus improving the specific on-resistance (R on,sp). There are three p-type pillars in the modified structure, with the p-type pillars on both sides playing the same role. The p-type conductive pillars relieve the electric field (E-field) in the corner of the trench bottom. Two-dimensional simulation (silvaco TCAD) indicates that R on,sp of the modified structure, and breakdown voltage (V BR) are improved by 22.2% and 21.1% respectively, while the maximum figure of merit ( FOM=VBR2/Ron,sp ) is improved by 79.0%. Furthermore, the improved structure achieves a light smaller low gate-to-drain charge (Q gd) and when compared with the conventional UMOSFET (conventional-UMOS), it displays great advantages for reducing the switching energy loss. These advantages are due to the fact that the p-type conductive pillars and n-type conductive pillars configured under the gate provide a substantial charge balance, which also enables the charge carriers to be extracted quickly. In the end, under the condition of the same total charge quantity, the simulation comparison of gate charge and OFF-state characteristics between Gauss-doped structure and uniform-doped structure shows that Gauss-doped structure increases the V BR of the device without degradation of dynamic performance.

Deep oxide trench termination structure for super-junction MOSFET

A Novel Super-Junction DT-MOS with Floating p Regions to Improve Short-Circuit Ruggedness

Novel High-Tolerance Termination with Resistive Field Plate for 600 V Super-Junction Vertical Double-Diffused MOSFET

A High Breakdown Voltage Superjunction MOSFET by Utilizing Double Trench Filling Epitaxy Growth

A 4H-SiC semi-super-junction shielded trench MOSFET: p-pillar is grounded to optimize the electric field characteristics

High-Voltage SOI Deep Trench LDMOS with Quasi Vertical Super Junction Structure

Fabrication and Optimization of a High-Reliability 700 V Super-Junction MOSFET with Segmented P-Buried RESURF Termination

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

V-groove trench gate SiC MOSFET with a double reduced surface field junction termination extensions structure

A High-Performance SiC Super-Junction MOSFET With a Step-Doping Profile

Investigation of a 4H-SiC Trench MOSFET with Back-Side Super Junction

A Novel Deep-Trench Super-Junction SiC MOSFET with Improved Specific On-Resistance

Evaluation of Trench Oxide Protection Techniques on Ultra High Voltage (10 kV) 4H-SiC UMOSFETs

New Cmos Compatible Super-Junction Ldmost with N-Type Buried Layer

Ultralow Specific On-Resistance Superjunction Vertical DMOS With High- Dielectric Pillar

Improved 4H-Sic UMOSFET with Super-Junction Shield Region

Concept and design of super junction devices

Improvement on short-circuit ability of SiC super-junction MOSFET with partially widened pillar structure

A Novel SiC Superjunction Trench MOSFET with Integrated Heterojunction Diode for Improved Performance

Fabrication and Optimization of a High Speed Deep-Trench Super-Junction MOSFET with Improved EMI Performance

An Improved Superjunction Structure with Variation Vertical Doping Profile