Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Junction termination structure of transverse high-pressure power semiconductor device

Hybrid Junction Termination Consisting of a Variation Lateral Doping Structure and a Spiral Polysilicon Resistive Field Plate

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Deep oxide trench termination structure for super-junction MOSFET

Novel High-Tolerance Termination with Resistive Field Plate for 600 V Super-Junction Vertical Double-Diffused MOSFET

An Improved Composite JTE Termination Technique for Ultrahigh Voltage 4H-Sic Power Devices

Deep-Trench Termination of Bipolar RF Power Devices

Ultra-high voltage device termination using the 3D RESURF (super-junction) concept - experimental demonstration at 6.5 kV

Design of bevel junction termination extension structure for high-performance vertical GaN Schottky barrier diode

Practical One-Step Solution of Smoothly Tapered Junction Termination Extension for High Voltage SiC Gate Turn-off Thyristor

Optimization of Reverse Recovery Characteristics Based on Termination Structure for 700V Super-Junction VDMOS

A Novel Junction Termination Technique with Excellent Cost-Performance and Extraordinary Anti-Charge-Deviation Ability

4H-Sic BJTs with Epitaxial Junction Termination Composite Structure

Improved Etched Multistep JTE for UHV SiC Power Devices

Fabrication and Optimization of a High-Reliability 700 V Super-Junction MOSFET with Segmented P-Buried RESURF Termination

V-groove trench gate SiC MOSFET with a double reduced surface field junction termination extensions structure

A Novel Substrate Termination Technology for Lateral Double-Diffused Mosfet Based on Curved Junction Extension

Over Kilovolt Gan Vertical Super-Junction Trench Mosfet: Approach For Device Design And Optimization

Etched Junction Termination Extension With Floating Guard Rings And Middle Rings For Ultrahigh-Voltage 4h-Sic Pin Diodes

High Performance Termination of Power Devices with Multi-epi Method