Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Practical One-Step Solution of Smoothly Tapered Junction Termination Extension for High Voltage SiC Gate Turn-off Thyristor

Implantation-free SiC Thyristor with Single-Mask 3D Termination Near 10 Kv

12.5 Kv SiC Gate Turn off Thyristor with Trench-Modulated JTE Structure

Implantation-free 2-Step Junction Termination Extension with 2-Space Modulated Buffer Trench Regions for UHV 4H-SÍC GTO Thyristors

Single-Mask Implantation-Free Technique Based on Aperture Density Modulation for Termination in High-Voltage SiC Thyristors

Modeling and Optimization of Smoothly Tapered Junction Termination Extension for High-Voltage SiC BJTs and Thyristors by Simulation

An Improved Composite JTE Termination Technique for Ultrahigh Voltage 4H-Sic Power Devices

10-kV 4H-SiC Gate Turn-OFF Thyristors With Space-Modulated Buffer Trench Three-Step JTE

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Expanding the Dose Window of Step-Etched Space-Modulated JTE for Ultrahigh Voltage 4H-Sic Devices

Design and Optimization of Linearly Graded-Doping Junction Termination Extension for 3.3-Kv-class Igbts

Bevel Junction Termination Extension—A New Edge Termination Technique for 4H-Sic High-Voltage Devices

Improved Etched Multistep JTE for UHV SiC Power Devices

Multi-Step Junction Termination Extension Design and Simulation Study for 4H-Sic Schottky Barrier Diode

Step JTE, an Edge Termination for UHV SiC Power Devices with Increased Tolerances to JTE Dose and Surface Charges

4H-Sic BJTs with Epitaxial Junction Termination Composite Structure

A Simple Method to Design the Single-Mask Multi-Zone Junction Termination Extension for High-Voltage IGBT

High Voltage SiC JBS Diodes with Multiple Zone Junction Termination Extension Using Single Etching Step

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Optimum Design of 1.4kv Non-Punch-Through Trench Igbts: the Next Generation of High-Power Switching Devices

Fabrication characteristics of 1.2kV SiC junction barrier schottky rectifiers with etched implant junction termination extension