Abstract:This article presents the design and fabrication results of the silicon carbide (SiC) super-junction Schottky barrier diode (SBD). The impact of two key device structure parameters, i.e., mesa width (MW) and trench width (TW), on the device forward and reverse performance is studied by numeric simulations and measurements. Furthermore, a simple and efficient termination structure, i.e., wide-trench termination, is proposed to protect the device edge. With this termination, the simulated device breakdown voltage is significantly increased from 1423 to 2600 V with a wide-trench termination width (WTW) larger than $20~\mu \text{m}$ . The outermost MW (OMW) of the transition region is also investigated. It is found that the narrower OMW can mitigate the electric field crowding at the top of the outermost mesa and reduce the electrical stress of the dielectric. Devices with different structural parameters are fabricated and measured. The device with WTW $= 50\,\,\mu \text{m}$ and the optimum OMW demonstrates the highest breakdown voltage of 1920 V. The specific ON-resistance ( ${R}_{{\rm \scriptscriptstyle {ON}},\text {sp}}$ ) of this device is 1.6 $\text{m}\Omega \cdot $ cm2. Subtracting the substrate resistance, the ${R}_{{\rm \scriptscriptstyle {ON}},\text {sp}}$ is only 1.2 $\text{m}\Omega \cdot $ cm2. Such device performance successfully breaks the theoretical 1-D limit of the SiC unipolar device. Furthermore, the leakage current path of the fabricated device is investigated by thermal emission microscope (EMMI). Future improvements to reduce the leakage current are also provided.

High Voltage SiC JBS Diodes with Multiple Zone Junction Termination Extension Using Single Etching Step

Multi-Step Junction Termination Extension Design and Simulation Study for 4H-Sic Schottky Barrier Diode

Improved Etched Multistep JTE for UHV SiC Power Devices

Fabrication characteristics of 1.2kV SiC junction barrier schottky rectifiers with etched implant junction termination extension

Implantation-free SiC Thyristor with Single-Mask 3D Termination Near 10 Kv

Etched Junction Termination Extension With Floating Guard Rings And Middle Rings For Ultrahigh-Voltage 4h-Sic Pin Diodes

Step JTE, an Edge Termination for UHV SiC Power Devices with Increased Tolerances to JTE Dose and Surface Charges

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Development of G10kv 4H-Sic SBD Junction Extension Termination

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

Expanding the Dose Window of Step-Etched Space-Modulated JTE for Ultrahigh Voltage 4H-Sic Devices

4.15 Kv / 4.6 Mω·cm2 4H-Sic Epi-refilled Super-Junction Schottky Diode with Ring Assisted Super-Junction Termination Extension

Two-mesa, guard rings assisted two-zone JTE for ultrahigh-voltage(>10kv) 4H-SiC p-i-n diodes

Single-Mask Implantation-Free Technique Based on Aperture Density Modulation for Termination in High-Voltage SiC Thyristors

Simulation of 4H-SiC Trench Junction Barrier Schottky Diodes with High-k Dielectrics

Simulation study of vertical diamond Schottky barrier diode with field plate assisted junction termination extension

Design and Optimization of Planar Mesa Termination for Diamond Schottky Barrier Diodes

Theoretical Study of an Effective Field Plate Termination for SiC Devices Based on High-k Dielectrics

Ultra-high voltage device termination using the 3D RESURF (super-junction) concept - experimental demonstration at 6.5 kV

Direct Barrier Evaluation Method for SiC Devices with Junction Barrier Schottky Structures Demonstrated with Quasi-Continuous Spacing Variation