Abstract:An area efficient multizone gradient-modulated guard ring (MGM-GR) edge termination technique is proposed, fabricated, and analyzed for 10-kV class silicon carbide devices without extra process steps or masks, which provides a better tradeoff between near ideal blocking capabilities and technological process complexity. The edge termination region is divided into multiple zones by employing MGM-GR technique, which forms a similar linearly graded doping profile to relieve the amount of electric field crowding at the periphery of the active area and achieve a maximum blocking voltage with wide tolerance to implantation dose. The proposed device shows not less than a 35% reduction in edge termination area in comparison with a conventional equally spaced ring at a breakdown voltage of 10 kV. Moreover, MGM-GR shows good tolerances to breakdown voltage for total implant dose and interface charges. With the application of MGM-GR technique to SiC MOSFET with a 100- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> -thick N <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−</sup> epilayer doped to <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$5 \times 10^{14}$ </tex-math></inline-formula> cm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$^{-3}$ </tex-math></inline-formula> , the measured breakdown voltage is 13.6 kV at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$10~\mu \text{A}$ </tex-math></inline-formula> . This voltage is nearly 95% of the theoretical value calculated for a 1-D structure. Simulated and measured characteristics show that MGM-GR structure is a candidate for an ultrahigh voltage power device to maximize power density and driving down system complexity.

A New Edge Termination Technique for High-Voltage Devices in 4H-Sic–multiple-floating-zone Junction Termination Extension

Bevel Junction Termination Extension—A New Edge Termination Technique for 4H-Sic High-Voltage Devices

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

An Improved Composite JTE Termination Technique for Ultrahigh Voltage 4H-Sic Power Devices

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Etched Junction Termination Extension With Floating Guard Rings And Middle Rings For Ultrahigh-Voltage 4h-Sic Pin Diodes

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

Improved Etched Multistep JTE for UHV SiC Power Devices

Single-Implant, Field Plate and Guard Rings Assist Multi-Zone Graded Jte for 4H-Sic P-I-N Diodes

High Voltage SiC JBS Diodes with Multiple Zone Junction Termination Extension Using Single Etching Step

Expanding the Dose Window of Step-Etched Space-Modulated JTE for Ultrahigh Voltage 4H-Sic Devices

Two-mesa, guard rings assisted two-zone JTE for ultrahigh-voltage(>10kv) 4H-SiC p-i-n diodes

A Multiple-Ring-Modulated JTE Technique for 4H-Sic Power Device with Improved JTE-Dose Window

Characterization and Fabrication of the CFM-JTE for 4H-Sic Power Device with High-Efficiency Protection and Increased JTE Dose Tolerance Window

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Area-Efficient Bevel-Edge Termination Techniques for SiC High-Voltage Devices

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

Multizone Gradient-Modulated Guard Ring Technique for Ultrahigh Voltage 4H-SiC Devices With Increased Tolerances to Implantation Dose and Surface Charges

Ultra-high voltage device termination using the 3D RESURF (super-junction) concept - experimental demonstration at 6.5 kV

A Simple Method to Design the Single-Mask Multi-Zone Junction Termination Extension for High-Voltage IGBT

Trench Field Plate Engineering for High Efficient Edge Termination of 1200 V-class SiC Devices