Abstract:An area efficient multizone gradient-modulated guard ring (MGM-GR) edge termination technique is proposed, fabricated, and analyzed for 10-kV class silicon carbide devices without extra process steps or masks, which provides a better tradeoff between near ideal blocking capabilities and technological process complexity. The edge termination region is divided into multiple zones by employing MGM-GR technique, which forms a similar linearly graded doping profile to relieve the amount of electric field crowding at the periphery of the active area and achieve a maximum blocking voltage with wide tolerance to implantation dose. The proposed device shows not less than a 35% reduction in edge termination area in comparison with a conventional equally spaced ring at a breakdown voltage of 10 kV. Moreover, MGM-GR shows good tolerances to breakdown voltage for total implant dose and interface charges. With the application of MGM-GR technique to SiC MOSFET with a 100- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{m}$ </tex-math></inline-formula> -thick N <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−</sup> epilayer doped to <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$5 \times 10^{14}$ </tex-math></inline-formula> cm <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$^{-3}$ </tex-math></inline-formula> , the measured breakdown voltage is 13.6 kV at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$10~\mu \text{A}$ </tex-math></inline-formula> . This voltage is nearly 95% of the theoretical value calculated for a 1-D structure. Simulated and measured characteristics show that MGM-GR structure is a candidate for an ultrahigh voltage power device to maximize power density and driving down system complexity.

Single-Implant, Field Plate and Guard Rings Assist Multi-Zone Graded Jte for 4H-Sic P-I-N Diodes

Two-mesa, guard rings assisted two-zone JTE for ultrahigh-voltage(>10kv) 4H-SiC p-i-n diodes

Etched Junction Termination Extension With Floating Guard Rings And Middle Rings For Ultrahigh-Voltage 4h-Sic Pin Diodes

A New Edge Termination Technique for High-Voltage Devices in 4H-Sic–multiple-floating-zone Junction Termination Extension

A Multiple-Ring-Modulated JTE Technique for 4H-Sic Power Device with Improved JTE-Dose Window

Bevel Junction Termination Extension—A New Edge Termination Technique for 4H-Sic High-Voltage Devices

Expanding the Dose Window of Step-Etched Space-Modulated JTE for Ultrahigh Voltage 4H-Sic Devices

Step JTE, an Edge Termination for UHV SiC Power Devices with Increased Tolerances to JTE Dose and Surface Charges

An Improved Composite JTE Termination Technique for Ultrahigh Voltage 4H-Sic Power Devices

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

Characterization and Fabrication of the CFM-JTE for 4H-Sic Power Device with High-Efficiency Protection and Increased JTE Dose Tolerance Window

Multi-Step Junction Termination Extension Design and Simulation Study for 4H-Sic Schottky Barrier Diode

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Development of G10kv 4H-Sic SBD Junction Extension Termination

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

4.15 Kv / 4.6 Mω·cm2 4H-Sic Epi-refilled Super-Junction Schottky Diode with Ring Assisted Super-Junction Termination Extension

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Improved Etched Multistep JTE for UHV SiC Power Devices

A Near Ideal Edge Termination Technique for Ultrahigh-Voltage 4H-Sic Devices with Multi-Zone Gradient Field Limiting Ring

4H-Sic BJTs with Epitaxial Junction Termination Composite Structure

Multizone Gradient-Modulated Guard Ring Technique for Ultrahigh Voltage 4H-SiC Devices With Increased Tolerances to Implantation Dose and Surface Charges