Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

A Multiple-Ring-Modulated JTE Technique for 4H-Sic Power Device with Improved JTE-Dose Window

Etched Junction Termination Extension With Floating Guard Rings And Middle Rings For Ultrahigh-Voltage 4h-Sic Pin Diodes

High Voltage SiC JBS Diodes with Multiple Zone Junction Termination Extension Using Single Etching Step

Improved Etched Multistep JTE for UHV SiC Power Devices

Development of G10kv 4H-Sic SBD Junction Extension Termination

Step JTE, an Edge Termination for UHV SiC Power Devices with Increased Tolerances to JTE Dose and Surface Charges

Single-Implant, Field Plate and Guard Rings Assist Multi-Zone Graded Jte for 4H-Sic P-I-N Diodes

Multi-Step Junction Termination Extension Design and Simulation Study for 4H-Sic Schottky Barrier Diode

Expanding the Dose Window of Step-Etched Space-Modulated JTE for Ultrahigh Voltage 4H-Sic Devices

Fabrication characteristics of 1.2kV SiC junction barrier schottky rectifiers with etched implant junction termination extension

Two-mesa, guard rings assisted two-zone JTE for ultrahigh-voltage(>10kv) 4H-SiC p-i-n diodes

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

12.5 Kv SiC Gate Turn off Thyristor with Trench-Modulated JTE Structure

4.15 Kv / 4.6 Mω·cm2 4H-Sic Epi-refilled Super-Junction Schottky Diode with Ring Assisted Super-Junction Termination Extension

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

Implantation-free SiC Thyristor with Single-Mask 3D Termination Near 10 Kv

High-Performance 4H-Sic Junction Barrier Schottky Diodes with Double Resistive Termination Extensions

Design and Fabrication of 1.92 Kv 4H-Sic Super-Junction SBD with Wide-Trench Termination

4H-Sic Trench-gate MOSFET with JTE Termination