Abstract:In this paper, simulation modeling was carried out using Sentaurus Technology Computer-Aided Design. Two types of high electron mobility transistors (HEMT), an AlGaN/GaN/AlGaN double heterojunction and AlGaN/GaN single heterojunction, were designed and compared. The breakdown characteristics and damage mechanisms of the two devices under the injection of high-power microwaves (HPM) were studied. The variation in current density and peak temperature inside the device was analyzed. The effect of Al components at different layers of the device on the breakdown of HEMTs is discussed. The effect and law of the power damage threshold versus pulse width when the device was subjected to HPM signals was verified. It was shown that the GaN HEMT was prone to thermal breakdown below the gate, near the carrier channels. A moderate increase in the Al component can effectively increased the breakdown voltage of the device. Compared with the single heterojunction, the double heterojunction HEMT devices were more sensitive to Al components. The high domain-limiting characteristics effectively inhibited the overflow of channel electrons into the buffer layer, which in turn regulated the current density inside the device and improved the temperature distribution. The leakage current was reduced and the device switching characteristics and breakdown voltage were improved. Moreover, the double heterojunction device had little effect on HPM power damage and high damage resistance. Therefore, a theoretical foundation is proposed in this paper, indicating that double heterojunction devices are more stable compared to single heterojunction devices and are more suitable for applications in aviation equipment operating in high-frequency and high-voltage environments. In addition, double heterojunction GaN devices have higher radiation resistance than SiC devices of the same generation.

Research Progress on AlGaN/GaN-based HEMT

Electro-thermal-stress interaction of GaN HEMT breakdown induced by high power microwave pulses

11.2 W/mm power density AlGaN/GaN high electron-mobility transistors on a GaN substrate

Progress in the Development of Power Amplifiers Based on AlGaN/GaN HEMT's

Damage Effects and Mechanisms of High-Power Microwaves on Double Heterojunction GaN HEMT

AlN/beta-Ga2O3 based HEMT: a potential pathway to ultimate high power device

High breakdown voltage AlGaN-GaN power-HEMT design and high current density switching behavior

Improvement of Power Performance of GaN HEMT by Using Quaternary InAlGaN Barrier

Hybrid High-Power AlGaN/CdZnO/GaN/AlGaN HEMT with High Breakdown Voltage

Study of Normally-Off AlGaN/GaN HEMT with Microfield Plate for Improvement of Breakdown Voltage

High Breakdown Voltage AlGaN/GaN HEMTs with a Dipole Layer for Microwave Power Applications

High Breakdown AlGaN/GaN MOSHEMT with Thermal Oxidized Ni/Ti As Gate Insulator

Investigation on Failure Mechanisms of GaN HEMT Caused by High-Power Microwave (HPM) Pulses

Recent Advances in GaN‐Based Power HEMT Devices

Analysis of Operational Characteristics of AlGaN/GaN High-Electron-Mobility Transistor with Various Slant-Gate-Based Structures: A Simulation Study

31 W/mm at 8 GHz in InAlGaN/GaN HEMT With Thermal CVD SiNx Passivation

Simulation of High Breakdown Voltage, Improved Current Collapse Suppression, and Enhanced Frequency Response AlGaN/GaN HEMT Using A Double Floating Field Plate

Evaluation of Power and Linearity at 30 GHz in AlGaN/GaN HEMT Fabricated by Integrating Transistors With Multiple Threshold Voltages

A novel AlGaN/GaN HEMTs technology for intelligent electric network application

Recent developments in materials, architectures and processing of AlGaN/GaN HEMTs for future RF and power electronic applications: A critical review

High-Efficiency AlGaN/GaN/Graded-AlGaN/GaN Double-Channel HEMTs for Sub-6G Power Amplifier Applications