Simulation of High Breakdown Voltage, Improved Current Collapse Suppression, and Enhanced Frequency Response AlGaN/GaN HEMT Using A Double Floating Field Plate

Peiran Wang,Chenkai Deng,Hongyu Cheng,Weichih Cheng,Fangzhou Du,Chuying Tang,Chunqi Geng,Nick Tao,Qing Wang,Hongyu Yu
DOI: https://doi.org/10.3390/cryst13010110
IF: 2.7
2023-01-08
Crystals
Abstract:In this paper, DC, transient, and RF performances among AlGaN/GaN HEMTs with a no field plate structure (basic), a conventional gate field plate structure (GFP), and a double floating field plate structure (2FFP) were studied by utilizing SILVACO ATLAS 2D device technology computer-aided design (TCAD). The peak electric fields under the gate in drain-side can be alleviated effectively in 2FFP devices, compared with basic and GFP devices, which promotes the breakdown voltage (BV) and suppresses the current collapse phenomenon. As a result, the ON-resistance increase caused by the current collapse phenomena is dramatically suppressed in 2FFP ~19.9% compared with GFP ~49.8% when a 1 ms duration pre-stress was applied with Vds = 300 V in the OFF-state. Because of the discontinuous FP structure, more electric field peaks appear at the edge of the FFP stacks, which leads to a higher BV of ~454.4 V compared to the GFP ~394.3 V and the basic devices ~57.6 V. Moreover, the 2FFP structure performs lower a parasitic capacitance of Cgs = 1.03 pF and Cgd = 0.13 pF than those of the GFP structure (i.e., Cgs = 1.89 pF and Cgd = 0.18 pF). Lower parasitic capacitances lead to a much higher cut-off frequency (ft) of 46 GHz and a maximum oscillation frequency (fmax) of 130 GHz than those of the GFP structure (i.e., ft = 27 GHz and fmax = 93 GHz). These results illustrate the superiority of the 2FFP structure for RF GaN HEMT and open up enormous opportunities for integrated RF GaN devices.
materials science, multidisciplinary,crystallography
What problem does this paper attempt to address?