Abstract:In this paper, DC, transient, and RF performances among AlGaN/GaN HEMTs with a no field plate structure (basic), a conventional gate field plate structure (GFP), and a double floating field plate structure (2FFP) were studied by utilizing SILVACO ATLAS 2D device technology computer-aided design (TCAD). The peak electric fields under the gate in drain-side can be alleviated effectively in 2FFP devices, compared with basic and GFP devices, which promotes the breakdown voltage (BV) and suppresses the current collapse phenomenon. As a result, the ON-resistance increase caused by the current collapse phenomena is dramatically suppressed in 2FFP ~19.9% compared with GFP ~49.8% when a 1 ms duration pre-stress was applied with Vds = 300 V in the OFF-state. Because of the discontinuous FP structure, more electric field peaks appear at the edge of the FFP stacks, which leads to a higher BV of ~454.4 V compared to the GFP ~394.3 V and the basic devices ~57.6 V. Moreover, the 2FFP structure performs lower a parasitic capacitance of Cgs = 1.03 pF and Cgd = 0.13 pF than those of the GFP structure (i.e., Cgs = 1.89 pF and Cgd = 0.18 pF). Lower parasitic capacitances lead to a much higher cut-off frequency (ft) of 46 GHz and a maximum oscillation frequency (fmax) of 130 GHz than those of the GFP structure (i.e., ft = 27 GHz and fmax = 93 GHz). These results illustrate the superiority of the 2FFP structure for RF GaN HEMT and open up enormous opportunities for integrated RF GaN devices.

An Algan/Gan Hemt with Enhanced Breakdown and A Near-Zero Breakdown Voltage Temperature Coefficient

Study of Normally-Off AlGaN/GaN HEMT with Microfield Plate for Improvement of Breakdown Voltage

A Novel AlGaN/Si3N4 Compound Buffer Layer HEMT with Improved Breakdown Performances

Optimization AlGaN/GaN HEMT with Field Plate Structures

Simulation of High Breakdown Voltage, Improved Current Collapse Suppression, and Enhanced Frequency Response AlGaN/GaN HEMT Using A Double Floating Field Plate

Breakdown voltage improvement of enhancement mode AlGaN/GaN HEMT by a novel step-etched GaN buffer structure

Breakdown enhancement and hot electrons mitigation for p-GaN gate HEMTs by electric field modulation

Algan/Gan Hemts with an Insulated Gate Fabricated by Inductively Coupled Plasma Oxidization

High Breakdown AlGaN/GaN MOSHEMT with Thermal Oxidized Ni/Ti As Gate Insulator

A novel field plate with arcuate end for improving GaN HEMTs

An AlGaN-GaN HEMT with p-GaN Extended Gate for Improvements on Current Dispersion and Breakdown Characteristics

A high breakdown voltage AlGaN/GaN MOSHEMT using thermal oxidized Al-Ti as the gate insulator

The improvement of breakdown-voltage (¿2000 V) in GaN based HFETs by using double polarization junctions

High-performance normally off p-GaN gate high-electron-mobility transistor with In 0.17 Al 0.83 N barrier layer design

Design and electrical modelling of a depletion-mode P-type triple-field-plated AlGaN/GaN on SiC HEMT with 2.45 kV breakdown voltage

A Novel Junction Field Plates AlGaN/GaN Heterostructure Field Effect Transistors with High Breakdown Voltage and Baliga's Figure of Merit for Power Electronics Application

Enhanced Breakdown Voltage and Dynamic Performance of GaN HEMTs with AlN/GaN Superlattice Buffer

Study on a p-GaN HEMT with composite passivation and composite barrier layers

Novel High-Energy-Efficiency AlGaN/GaN HEMT with High Gate and Multi-Recessed Buffer

High-performance normally off p-GaN gate high-electron-mobility transistor with In0.17Al0.83N barrier layer design

A Novel GaN:C Millimeter-Wave HEMT with AlGaN Electron-Blocking Layer