Abstract:In this paper, DC, transient, and RF performances among AlGaN/GaN HEMTs with a no field plate structure (basic), a conventional gate field plate structure (GFP), and a double floating field plate structure (2FFP) were studied by utilizing SILVACO ATLAS 2D device technology computer-aided design (TCAD). The peak electric fields under the gate in drain-side can be alleviated effectively in 2FFP devices, compared with basic and GFP devices, which promotes the breakdown voltage (BV) and suppresses the current collapse phenomenon. As a result, the ON-resistance increase caused by the current collapse phenomena is dramatically suppressed in 2FFP ~19.9% compared with GFP ~49.8% when a 1 ms duration pre-stress was applied with Vds = 300 V in the OFF-state. Because of the discontinuous FP structure, more electric field peaks appear at the edge of the FFP stacks, which leads to a higher BV of ~454.4 V compared to the GFP ~394.3 V and the basic devices ~57.6 V. Moreover, the 2FFP structure performs lower a parasitic capacitance of Cgs = 1.03 pF and Cgd = 0.13 pF than those of the GFP structure (i.e., Cgs = 1.89 pF and Cgd = 0.18 pF). Lower parasitic capacitances lead to a much higher cut-off frequency (ft) of 46 GHz and a maximum oscillation frequency (fmax) of 130 GHz than those of the GFP structure (i.e., ft = 27 GHz and fmax = 93 GHz). These results illustrate the superiority of the 2FFP structure for RF GaN HEMT and open up enormous opportunities for integrated RF GaN devices.

Effect of jagged field plate structures on DC and RF performance of AlGaN/GaN HEMTs

Optimization AlGaN/GaN HEMT with Field Plate Structures

Simulation of High Breakdown Voltage, Improved Current Collapse Suppression, and Enhanced Frequency Response AlGaN/GaN HEMT Using A Double Floating Field Plate

Study of Normally-Off AlGaN/GaN HEMT with Microfield Plate for Improvement of Breakdown Voltage

Study on the Gate-Terminated Field-Plates for GaN-Based HEMT

Analysis of Operational Characteristics of AlGaN/GaN High-Electron-Mobility Transistor with Various Slant-Gate-Based Structures: A Simulation Study

ATLAS Simulation on Electrical Field Distribution of AlGaN/GaN HEMT

Breakdown Voltage Enhancement for Power AlGaN/GaN HEMTs with Air-bridge Field Plate

Effect of gate structures on the DC and RF performance of AlGaN/GaN HEMTs

A Novel AlGaN/Si3N4 Compound Buffer Layer HEMT with Improved Breakdown Performances

Study of the Breakdown Failure Mechanisms for Power AlGaN/GaN HEMTs Implemented Using a RF Compatible Process

An AlGaN/GaN HEMT with a reduced surface electric field and an improved breakdown voltage

Effect of Device Geometry on Static and Dynamic Performance of AlGaN/GaN-on-Si High Electron Mobility Transistor

Breakdown-Voltage-Enhancement Technique for RF-Based AlGaN/GaN HEMTs with a Source-Connected Air-Bridge Field Plate

The DC Performance and RF Characteristics of GaN-Based HEMTs Improvement Using Graded AlGaN Back Barrier and Fe/C Co-Doped Buffer

Dynamic Characterizations of AlGaN-GaN HEMTs with Field-plates Using a Double-gate Structure

A novel field plate with arcuate end for improving GaN HEMTs

Breakdown voltage improvement of enhancement mode AlGaN/GaN HEMT by a novel step-etched GaN buffer structure

Constructing drain surrounded double gate structure in AlGaN/GaN HEMT for boosting breakdown voltage

An Algan/Gan Hemt with Enhanced Breakdown and A Near-Zero Breakdown Voltage Temperature Coefficient

Optimization of Gate-Head-Top/Bottom Lengths of AlGaN/GaN High-Electron-Mobility Transistors with a Gate-Recessed Structure for High-Power Operations: A Simulation Study