Abstract:A reduced surface electric field in an AlGaN/GaN high electron mobility transistor (HEMT) is investigated by employing a localized Mg-doped layer under the two-dimensional electron gas (2-DEG) channel as an electric field shaping layer. The electric field strength around the gate edge is effectively relieved and the surface electric field is distributed evenly as compared with those of HEMTs with conventional source-connected field plate and double field plate structures with the same device physical dimensions. Compared with the HEMTs with conventional source-connected field plates and double field plates, the HEMT with a Mg-doped layer also shows that the breakdown location shifts from the surface of the gate edge to the bulk Mg-doped layer edge. By optimizing both the length of Mg-doped layer, L-m, and the doping concentration, a 5.5 times and 3 times the reduction in the peak electric field near the drain side gate edge is observed as compared with those of the HEMTs with source-connected field plate structure and double field plate structure, respectively. In a device with V-GS = 5 V, L-m = 1.5 mu m, a peak Mg doping concentration of 8x10(17) cm(-3) and a drift region length of 10 mu m, the breakdown voltage is observed to increase from 560 V in a conventional device without field plate structure to over 900 V without any area overhead penalty.

High Breakdown Voltage AlGaN/GaN HEMTs with a Dipole Layer for Microwave Power Applications

High Breakdown AlGaN/GaN MOSHEMT with Thermal Oxidized Ni/Ti As Gate Insulator

Simulation Design of a High-Breakdown-voltage P-Gan-gate GaN HEMT with a Hybrid AlGaN Buffer Layer for Power Electronics Applications

Study of Normally-Off AlGaN/GaN HEMT with Microfield Plate for Improvement of Breakdown Voltage

An AlGaN/GaN HEMT with a reduced surface electric field and an improved breakdown voltage

Breakdown Voltage Enhancement For Gan High Electron Mobility Transistors

The improvement of breakdown-voltage (¿2000 V) in GaN based HFETs by using double polarization junctions

AlN/beta-Ga2O3 based HEMT: a potential pathway to ultimate high power device

A high breakdown voltage AlGaN/GaN MOSHEMT using thermal oxidized Al-Ti as the gate insulator

A Novel Step–Doped Channel AlGaN/GaN HEMTs with Improved Breakdown Performance

High Breakdown Voltage InAlN/AlN/GaN HEMTs Achieved by Schottky-Source Technology

High-performance normally off p-GaN gate high-electron-mobility transistor with In 0.17 Al 0.83 N barrier layer design

A Sandwich-Structured AlGaN/GaN HEMT with Broad Transconductance and High Breakdown Voltage

An AlGaN-GaN HEMT with p-GaN Extended Gate for Improvements on Current Dispersion and Breakdown Characteristics

Constructing drain surrounded double gate structure in AlGaN/GaN HEMT for boosting breakdown voltage

Breakdown voltage improvement of enhancement mode AlGaN/GaN HEMT by a novel step-etched GaN buffer structure

High-performance normally off p-GaN gate high-electron-mobility transistor with In0.17Al0.83N barrier layer design

Breakdown Voltage Enhancement in AlGaN HEMTs with Local P-Doped Region in the Back-Barrier

Novel High Voltage RESURF Al GaN/GaN HEMT with Charged Buffer Layer

High Breakdown Voltage and Low Dynamic ON-Resistance AlGaN/GaN HEMT with Fluorine Ion Implantation in SiNx Passivation Layer

GaN high electron mobility transistors with localized Mg doping and Drain Metal Extension