Abstract:A reduced surface electric field in an AlGaN/GaN high electron mobility transistor (HEMT) is investigated by employing a localized Mg-doped layer under the two-dimensional electron gas (2-DEG) channel as an electric field shaping layer. The electric field strength around the gate edge is effectively relieved and the surface electric field is distributed evenly as compared with those of HEMTs with conventional source-connected field plate and double field plate structures with the same device physical dimensions. Compared with the HEMTs with conventional source-connected field plates and double field plates, the HEMT with a Mg-doped layer also shows that the breakdown location shifts from the surface of the gate edge to the bulk Mg-doped layer edge. By optimizing both the length of Mg-doped layer, L-m, and the doping concentration, a 5.5 times and 3 times the reduction in the peak electric field near the drain side gate edge is observed as compared with those of the HEMTs with source-connected field plate structure and double field plate structure, respectively. In a device with V-GS = 5 V, L-m = 1.5 mu m, a peak Mg doping concentration of 8x10(17) cm(-3) and a drift region length of 10 mu m, the breakdown voltage is observed to increase from 560 V in a conventional device without field plate structure to over 900 V without any area overhead penalty.

Improvement of Breakdown Characteristic for a Novel GaN HEMT with Enhanced Resistance Single-Event Transient Effect

Improvement of Single Event Transient Effects for a Novel AlGaN/GaN High Electron-Mobility Transistor with a P-GaN Buried Layer and a Locally Doped Barrier Layer

Breakdown voltage improvement of enhancement mode AlGaN/GaN HEMT by a novel step-etched GaN buffer structure

Simulation Design of a High-Breakdown-voltage P-Gan-gate GaN HEMT with a Hybrid AlGaN Buffer Layer for Power Electronics Applications

Novel High Voltage RESURF Al GaN/GaN HEMT with Charged Buffer Layer

Schottky-Contact Technology in InAlN/GaN HEMTs for Breakdown Voltage Improvement

High Breakdown Voltage InAlN/AlN/GaN HEMTs Achieved by Schottky-Source Technology

Breakdown enhancement and hot electrons mitigation for p-GaN gate HEMTs by electric field modulation

An AlGaN-GaN HEMT with p-GaN Extended Gate for Improvements on Current Dispersion and Breakdown Characteristics

Study of Normally-Off AlGaN/GaN HEMT with Microfield Plate for Improvement of Breakdown Voltage

A Novel AlGaN/Si3N4 Compound Buffer Layer HEMT with Improved Breakdown Performances

Improved breakdown voltage and dynamic R on characteristics in normally-off GaN-based HEMTs featuring fully-recessed and bilayer-dielectric gate structure

The improvement of breakdown-voltage (¿2000 V) in GaN based HFETs by using double polarization junctions

Enhanced Breakdown Voltage and Dynamic Performance of GaN HEMTs with AlN/GaN Superlattice Buffer

Study of AlGaN/GaN Vertical Superjunction HEMT for Improvement of Breakdown Voltage and Specific On-Resistance

Study on a p-GaN HEMT with composite passivation and composite barrier layers

Breakdown Voltage Enhancement in GaN Channel and AlGaN Channel HEMTs Using Large Gate Metal Height

An AlGaN/GaN HEMT with a reduced surface electric field and an improved breakdown voltage

Constructing drain surrounded double gate structure in AlGaN/GaN HEMT for boosting breakdown voltage

Novel High-Energy-Efficiency AlGaN/GaN HEMT with High Gate and Multi-Recessed Buffer

Breakdown Voltage Enhancement For Gan High Electron Mobility Transistors