Abstract:A reduced surface electric field in an AlGaN/GaN high electron mobility transistor (HEMT) is investigated by employing a localized Mg-doped layer under the two-dimensional electron gas (2-DEG) channel as an electric field shaping layer. The electric field strength around the gate edge is effectively relieved and the surface electric field is distributed evenly as compared with those of HEMTs with conventional source-connected field plate and double field plate structures with the same device physical dimensions. Compared with the HEMTs with conventional source-connected field plates and double field plates, the HEMT with a Mg-doped layer also shows that the breakdown location shifts from the surface of the gate edge to the bulk Mg-doped layer edge. By optimizing both the length of Mg-doped layer, L-m, and the doping concentration, a 5.5 times and 3 times the reduction in the peak electric field near the drain side gate edge is observed as compared with those of the HEMTs with source-connected field plate structure and double field plate structure, respectively. In a device with V-GS = 5 V, L-m = 1.5 mu m, a peak Mg doping concentration of 8x10(17) cm(-3) and a drift region length of 10 mu m, the breakdown voltage is observed to increase from 560 V in a conventional device without field plate structure to over 900 V without any area overhead penalty.

Breakdown Voltage Enhancement in GaN Channel and AlGaN Channel HEMTs Using Large Gate Metal Height

Breakdown voltage improvement of enhancement mode AlGaN/GaN HEMT by a novel step-etched GaN buffer structure

Breakdown Voltage Enhancement For Gan High Electron Mobility Transistors

Constructing drain surrounded double gate structure in AlGaN/GaN HEMT for boosting breakdown voltage

Breakdown enhancement and hot electrons mitigation for p-GaN gate HEMTs by electric field modulation

An AlGaN/GaN HEMT with a reduced surface electric field and an improved breakdown voltage

Breakdown Voltage Enhancement for Power AlGaN/GaN HEMTs with Air-bridge Field Plate

Theoretical Analysis of Buffer Trapping Effects on Off-State Breakdown Between Gate and Drain in AlGaN/GaN HEMTs

Improvement of Breakdown Characteristic for a Novel GaN HEMT with Enhanced Resistance Single-Event Transient Effect

Simulation Design of a High-Breakdown-voltage P-Gan-gate GaN HEMT with a Hybrid AlGaN Buffer Layer for Power Electronics Applications

A Novel Step–Doped Channel AlGaN/GaN HEMTs with Improved Breakdown Performance

Enhanced Breakdown Voltage and Dynamic Performance of GaN HEMTs with AlN/GaN Superlattice Buffer

Breakdown Voltage Enhancement and Specific On-Resistance Reduction in Depletion-Mode GaN HEMTs by Co-Modulating Electric Field

Breakdown Voltage Enhancement in AlGaN HEMTs with Local P-Doped Region in the Back-Barrier

Performance improvement of enhancement-mode GaN-based HEMT power devices by employing vertical gate structure and composite interlayers

Breakdown-Voltage-Enhancement Technique for RF-Based AlGaN/GaN HEMTs with a Source-Connected Air-Bridge Field Plate

A high breakdown voltage AlGaN/GaN MOSHEMT using thermal oxidized Al-Ti as the gate insulator

Study of Normally-Off AlGaN/GaN HEMT with Microfield Plate for Improvement of Breakdown Voltage

Optimizing Breakdown Voltage and On-State Resistance by Modulating the Barrier Height along 2DEG Channel for Power P-Gan HEMTs

Schottky-Contact Technology in InAlN/GaN HEMTs for Breakdown Voltage Improvement

An AlGaN-GaN HEMT with p-GaN Extended Gate for Improvements on Current Dispersion and Breakdown Characteristics