Abstract:An innovative process for preparing silicon carbide (SiC) from acid leaching residue of ferronickel slag through a carbon–thermal reduction process was proposed in this study. The results indicate that the acid leaching residue is an ideal silicon source for SiC preparation according to its high amorphous silica content of 84.20% and fine particle size of d50 = 29.16 μm. Compared with carbon black, activated carbon, and graphite, coke is the more appropriate carbon source for SiC preparation. A micron-size SiC powder with grade of 88.90% and an average particle size (d50) of 44.68 μm can be obtained under the following conditions: the mass ratio of coke to leaching residue as 1.2:1, in an air atmosphere, reducing at 1600 °C for 3 h, following by decarbonizing at 700 °C for 4 h. The XRD, SEM and FTIR analyses show that the prepared powder is 3C-SiC and belongs to the β-SiC crystal type. Based on thermodynamic analysis and micromorphology observation, it can be concluded that with amorphous silica as the silicon source, the carbon–thermal synthesis of SiC powder follows both the solid–solid reaction mechanism and the gas–solid mechanism. The SiC created through solid–solid reaction is primarily nucleated in situ on amorphous SiO2, with a size close to that of the original acid-leaching slag, while the SiC generated according to the gas–solid mechanism mainly nucleates heterogeneously on the surface of carbon particles, resulting in a smaller particle size and mostly adhering to the surface of solid–solid nucleated SiC particles. This study provides a feasible method for the effective utilization of amorphous silica, which is also significant for the efficient consumption of the vast acid leaching residue.

PREPARATION OF SPHERE-LIKE SUBMICRON SILICON CARBIDE POWDER

Synthesis and characterization of submicron silicon carbide powders with silicon and phenolic resin

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Preparation of Core-Shell Polycarbonate/BaSO_4 Submicron Composite Particles

Preparation of Core-Shell Silicon/Porous Carbon Powders

Preparation of Silicon Carbide Powder from Amorphous Silica and Investigation of Synthesis Mechanism

Preparation of hollow SiC spheres by combustion synthesis

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Preparation of Silicon Carbide Using Bamboo Charcoal As Carbon Source

Synthesis of nanocrystalline silicon carbide powders

Preparation and Sinterability of Submicron Titanium Carbide Powders Synthesized with Phenolic Resin As Carbon Source by Carbothermal Reduction

Synthesis of Silicon Nitride/Silicon Carbide Nanocomposite Powders through Partial Reduction of Silicon Nitride by Pyrolyzed Carbon

Preparation of silicon carbide ceramics using chemical treated powder by DCC via dispersant reaction and liquid phase sintering

Preparation of β-Sialon /SiC composite powder by carbothermal reaction of coal-mine schist

Preparation Of Nanocrystalline Silicon Carbide Powders By Carbothermal Reduction

Preparation of SiC Powders by Carbothermal Reduction with Bamboo Charcoal As Renewable Carbon Source

Microstructure Evolution Process of Porous Silicon Carbide Ceramics Prepared Through Coat-Mix Method

Preparation method of high-purity low-radioactivity spherical silicon micropowder

Synthesis and Characteristics of Cubic Silicon Carbide Nanospheres with Smooth Surfaces.

Preparation of Silicon Carbide Hollow Spheres by a Template Method

Effect of Carbon Powder on ZrC ZrO2 Microspheres Prepared by Internal Gelation Process