Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

Effect of Carbon Powder on ZrC ZrO2 Microspheres Prepared by Internal Gelation Process

The Fabrication of ZrO2–ZrC Microspheres by Internal Gelation and Carbothermal Reduction Process

The Effects of Carbon Content on ZrCO Microspheres Prepared by Internal Gelation Process with Carbon Black

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

The Preparation of ZrO2–ZrC Ceramic Microspheres by Internal Gelation Process with Sucrose As a Carbon Source

The Study of Carbothermic Reduction–sintering of ZrO2–ZrC–C Composite Microspheres Prepared by Internal Gelation

An Improved Internal Gelation Process for Preparing Zro2 Ceramic Microspheres Without Cooling the Precursor Solution

Preparation Of Small-Sized Zro2 Microspheres By Capillary Microfluidic Device Assisted Internal Gelation Process

Preparation of Small-Sized ZrO<sub>2</sub> Microspheres by Capillary Microfluidic Device Assisted Internal Gelation Process

Gel-casting Preparation of Ceramic ZrO2 Composition Microspheres

Carbothermal synthesis of zirconium carbide hollow microspheres from polyzirconoxane and phenolic resin by spray drying

Preparation of Monodisperse ZrO2 Ceramic Microspheres (>200 Μm) by Co-Axial Capillary Microfluidic Device Assisted Internal Gelation Process

Preparation of Zirconia Powders by Sol-gel Process

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Effect of Al2O3on the Process Performance of ZrO2Microspheres

Preparation of Ceria-Stabilized Zirconia Microspheres by External Gelation: Size Control

The Effect of a Carbon Additive on Compaction of Partially Stabilized Zirconia Powders upon Pressing and Sintering

The Effect of Washing Process on the Cracking of ZrO2 Microspheres by Internal Gelation

Fabrication And Characterization Of Zro2 Hollow Spheres

Preparation of ZrN Nanopowders by Internal Gelation and Carbothermic Nitridation

Precisely Controlling Preparation of Ceria‐Stabilized Zirconia Microspheres of ~100 Μm by External Gelation