Abstract:External gelation process was used to prepare ceria-stabilized zirconia (CSZ) microspheres at various conditions. The effects of nozzle inner diameter, broth flow rate and Zr concentration on microsphere diameter, standard deviation (SD) of diameter and sphericity were investigated. The microsphere diameter decreased, while sphericity increased as flow rate increased. Diameter SD was low at the middle flow rate range. Diameter and sphericity increased as Zr concentration increased. Crushing strength and density increased steadily while cracking rate decreased to 0 by 0.84 mol/L. The quantified results were summarized as boundary conditions for preparation of CSZ microspheres. They were depicted into a size control diagram. The CSZ microspheres from 96 to 573 μm in size could be prepared by selecting preparation conditions according to the diagram. The effectiveness of size control was confirmed by verification experiments. The obtained CSZ microspheres were characterized by optical microscopy, scanning electron microscopy, X-ray diffraction (XRD) and transmission electron microscopy (TEM). Microscopic images showed their monodispersity, good sphericity and smooth surface. XRD and TEM results revealed their well-crystallized CSZ phase.

The Preparation of ZrO2–ZrC Ceramic Microspheres by Internal Gelation Process with Sucrose As a Carbon Source

The Fabrication of ZrO2–ZrC Microspheres by Internal Gelation and Carbothermal Reduction Process

The Effects of Carbon Content on ZrCO Microspheres Prepared by Internal Gelation Process with Carbon Black

Effect of Carbon Powder on ZrC ZrO2 Microspheres Prepared by Internal Gelation Process

CO2 Sorption Durability of Zr-Modified Nano-CaO Sorbents with Cage-like Hollow Sphere Structure

The Study of Carbothermic Reduction–sintering of ZrO2–ZrC–C Composite Microspheres Prepared by Internal Gelation

An Improved Internal Gelation Process for Preparing Zro2 Ceramic Microspheres Without Cooling the Precursor Solution

Sol–gel Preparation of ZrC–ZrO2 Composite Microspheres Using Fructose As a Carbon Source

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Preparation Of Small-Sized Zro2 Microspheres By Capillary Microfluidic Device Assisted Internal Gelation Process

Preparation of Small-Sized ZrO<sub>2</sub> Microspheres by Capillary Microfluidic Device Assisted Internal Gelation Process

Fabrication Process Study of UCO Composite Ceramic Microspheres with Fructose As a Carbon Source by Internal Gelation and Carbothermic Reduction

Preparation of Monodisperse ZrO2 Ceramic Microspheres (>200 Μm) by Co-Axial Capillary Microfluidic Device Assisted Internal Gelation Process

Gel-casting Preparation of Ceramic ZrO2 Composition Microspheres

The Effect of Washing Process on the Cracking of ZrO2 Microspheres by Internal Gelation

Synthesis of porous ZrC particles derived from MOF-801

Preparation of Ceria-Stabilized Zirconia Microspheres by External Gelation: Size Control

Fabrication And Characterization Of Zro2 Hollow Spheres

The Effect of Sintering Atmosphere and C/U on UCO Microspheres by Internal Gelation Process with Carbon Black

Fabrication of ZrB 2 -Sic Ceramic Composites by Optimized Gel-Casting Method

Precisely Controlling Preparation of Ceria‐Stabilized Zirconia Microspheres of ~100 Μm by External Gelation