Abstract:A Ti-TiC-Fe cermet composite with a core-shell structure was fabricated by an in situ reaction at high temperature. The TiC-Fe cermet layer was formed at the interface between Ti and the gray cast iron (GCI). The XRD results indicate that the TiC-Fe cermet layer is composed mainly of alpha-Fe, Ti, and TiC. The statistical results of the electron backscattering diffraction (EBSD) indicate that the grain sizes are between 2 and 17 pm with the mean value of about 4 pm. The scanning electron microscope (SEM) analysis results demonstrated that the TiC-Fe cermet layer enwrapped the metallic Ti wire. The size of the TiC particles in the TiC-Fe cermet layer diminished gradually, and the tridimensional morphology varied from dense block to cubes or near-spheroids with the distance from interface of Ti/cermet layer to the interface of cermet layer/GCI. Accordingly, the nano-indentation results showed that the hardness of the TiC-Fe cermet layer decreased gradually with distance from interface of Ti/cermet layer to the interface of cermet layer/GCI, and that the highest hardness value of the TiC-Fe cermet layer is nearly 28.0 GPa. The high hardness and volume fraction of TiC-Fe cermet layer will obviously enhance the wear resistance of composites.

DENSE TiC-Al2O3-Fe CERMET FABRICATED BY SHS

TiC-Fe cermets fabricated by SHS

Microstructure and formation mechanism of TiC-30Fe cermet fabricated by SHS

Dense TiC-Al2O3 composites fabricated by SHS

Research on TiC-Ni cermets by SHS and pseudo heat isostatic pressing

PROPERTIES OF TiC-Al2O3/Fe COMPOSITES PREPARED BY SHS/PHIP

Investigation on microstructure of TiC-Fe cermets prepared by SHS/PHIP

Study of Ti(C,N)-Based Cermets Fabricated by Pressureless-HIP Sintering

Effect of Fe on the Phases and Microstructure of TiC–Fe Cermets by Combustion Synthesis/quasi-Isostatic Pressing

Fast Preparation of ZTA-TiC-FeCrNi Cermets by High-Gravity Combustion Synthesis

Microstructures of TiC-Al2O3-Fe composites prepared by SHS/PHIP

Research on TiC-Ni-Mo Composites by Combustion Synthesis

Growth Morphology and Microstructural Characterization of Nonstoichiometric Ti2alc Bulk Synthesized by Self-Propagating High Temperature Combustion Synthesis with Pseudo Hot Isostatic Pressing

MECHANICAL PROPERTIES OF TiC-Ni PRODUCED BY SHS AT ROOM AND HIGH TEMPERATURES

Characterization and Formation Mechanisms of the TiC-Fe Cermet Layer in Ti-TiC-Fe Composites

Combustion Synthesis of TiB-Ti Cermets

Influence Of Heat Treatment On The Microstructure And Properties Of Ti2alc By Shs/Phip

Fabrication of AlN-SiC-TiB2 Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing

Rapid Synthesis of Bulk Ti2alc by Self-Propagating High Temperature Combustion Synthesis with A Pseudo-Hot Isostatic Pressing Process

Fabrication, microstructure evolution, and mechanical properties of Ti(C,N)-HfN-WC-Ni-Mo cermets

Synthesis of TiB 2 /Ti(C,N) cermet by RSPS: formation mechanism, shrinkage behavior, and mechanical properties