Abstract:This paper introduces a novel process, known as pre-solid phase sintering-assisted pressureless infiltration (PSPS-PI), aimed at addressing issues related to the segregation of hard particles and excessive porosity in the manufacturing of lightweight cermet based on TiC. The PSPS-PI process involves compressing a green TiC powder compact with a minor Ni powder addition, followed by vacuum-based solid-phase sintering to create a fully consolidated TiC preform. This study explores the influence of TiC particle size and Ni content on the microstructure and properties of TiC–Cu composites, conducting a comparison with direct pressureless infiltration (D-PI). The results indicate that the high-melting-point Ni element promotes the formation of sintering necks between TiC and Ni, aiding in the consolidation of TiC particles. The stable skeleton ensures that TiC particles remain in their initial positions during subsequent pressureless infiltration, effectively preventing TiC powder segregation. TiC and Ni create a dissolutive wetting system during pressureless infiltration. The formation of the Ni2SnTi intermetallic compound significantly enhances the wettability with Cu alloy, leading to a reduction in porosity and the occurrence of crack defects within the composite. As particle size decreases, the preform's porosity decreases, resulting in a reduced proportion of soft metal binder and lower residual stress. Consequently, finer TiC powder leads to improved cermet hardness and a reduction in the number of micro-crack defects. In general, PSPS-PI allows for the attainment of low porosity, a uniform microstructure, enhanced hardness, and outstanding wear resistance in the lightweight cermet based on TiC with the appropriate TiC particle size (D50 = 10.2 μm), achieving a remarkable hardness of 642.9 (Hv30) and excellent toughness.

Study of Ti(C,N)-Based Cermets Fabricated by Pressureless-HIP Sintering

Effect of Cr2C3 addition on microstructure and mechanical properties of Ti(CN)-based cermets

Fabrication, microstructure evolution, and mechanical properties of Ti(C,N)-HfN-WC-Ni-Mo cermets

Effect of Cr<sub>2</sub>C<sub>3</sub> Addition on Microstructure and Mechanical Properties of Ti(CN)-Based Cermets

Research on TiC-Ni cermets by SHS and pseudo heat isostatic pressing

The production of in situ (Mo,Ti)(C,N)-based cermets without a core/rim structure by reaction hot pressing: Formation mechanism and mechanical properties

DENSE TiC-Al2O3-Fe CERMET FABRICATED BY SHS

Tuning microstructure for superb mechanical properties in a Ti(C,N)-(WMoTaNbTi)C-Ni/Co cermets via change sintering temperature

Nano TiC modified Ti(C,N)-based cermets with weakened rim-binder interfaces

Preparation and properties of Ti(C,N)-based cermets with graphene nanosheet addition by spark plasma sintering

Submicron Ti(C,N)-based cermets with improved microstructure using high-energy milled and subsequent heat-treated ultrafine Ti(C,N) powders

Investigation of TiC formation during ball-milling of elemental titanium and carbon

Graded Ti(C,N)-based cermets fabricated by mechanical activation and in situ carbothermal reduction: Investigation of nitrogen sintering pressure on microstructure and mechanical performance

Fabrication and Characterization of In-Situ Ti(C, N) - Cocrfeniti High Entropy Alloys Cermets

The spark plasma sintering of fine grained TiCN-Mo-Ni cermets

Microstructural evolution and phase transition mechanism of Ti(C,N)-based cermets during vacuum sintering process

Ultra-High Hardness TiC-W-Ni Cermets Prepared by Spark Plasma Sintering of Ultra-Fine TiC Powder

Lightweight TiC based cermet fabricated by a pre-solid phase sintering-assisted pressureless infiltration process

Microstructure and Properties of Ti(C,N)-Based Cermets with AlxCoCrFeNiTi Binder

MECHANICAL PROPERTIES OF TiC-Ni PRODUCED BY SHS AT ROOM AND HIGH TEMPERATURES

Effect of Nano-Si3n4 Addition on the Microstructure and Mechanical Properties of Ticn-Based Cermets