Abstract:Two-phase fully dense high entropy carbide (HEC) cermets were successfully prepared following the conventional cemented carbide/cermet processing route. Cold isostatically pressed equimolar TiC, VC, NbC, TaC and WC powder mixtures with 12 vol% Ni binder were pressureless sintered in the solid state and liquid phase sintering regimes respectively. A homogeneous rock-salt (space group Fm 3 ̄ m ) HEC phase embedded in a nickel alloy binder was attained by liquid phase sintering at 1420 °C. Thermodynamic simulations were conducted to predict the equilibrium phases and carbide/binder phase contents. The phase evolution was investigated at seven different sintering temperatures in the 900–1420 °C window. Thermogravimetry and differential scanning calorimetry analysis were performed to follow up the sintering process. Electron probe microanalysis was used to map the elemental distribution as well as to quantify the constituent phase contents. Nanoindentation were performed to correlate the difference in mechanical properties of the core-rim structured HEC grains with the chemical composition. The liquid phase sintered (Ti,V,Nb,Ta,W)C- 12 vol% Ni had a Vickers hardness of 14.3 GPa and Palmqvist indentation fracture toughness of 9.2 MPa. m 1/2 .

Research on TiC-Ni cermets by SHS and pseudo heat isostatic pressing

Research on TiC-Ni-Mo Composites by Combustion Synthesis

MECHANICAL PROPERTIES OF TiC-Ni PRODUCED BY SHS AT ROOM AND HIGH TEMPERATURES

Combustion synthesis and densification of large-scale TiC–xNi cermets

Dense TiC-Al2O3 composites fabricated by SHS

DENSE TiC-Al2O3-Fe CERMET FABRICATED BY SHS

Study of Ti(C,N)-Based Cermets Fabricated by Pressureless-HIP Sintering

Thermal physical properties of TiC-xNi cermets produced by combustion synthesis

In-situ Combustion Synthesis and Densification of TiC–xNi Cermets

High pressure in-situ synthesis and physical properties of Cr3C2-Ni cermets

THERMAL EXPANSION CHARACTERISTIC OF TiC- Ni CERMETS PREPARED BY SHS

Fabrication of AlN-SiC-TiB2 Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing

INFLUENCE OF Ni CONTENT ON TiC-Ni CERMETS BY SHS/PHIP

COMBUSTION SYNTHFSIS AND DENSIFICATION BY GAS HOT ISOSTATIC PRESSURE OF AIN- TiB2 CERAMIC WITHOUT ENVELOPE

Synthesis and Properties of AlN-SiC-TiB2 Ceramics by SHS-HIP

In situ synthesis and mechanical properties of bulk Ti3SiC2/TiC composites by SHS/PHIP

Self-propagating high-temperature synthesis of TiC-TiB2 multiphase ceramics

Liquid phase assisted synthesis of (Ti,V,Nb,Ta,W)C-Ni high entropy carbide cermets by conventional pressureless sintering

Preparation and organization of W-Ni/TiC composite material

Synthesis of TiB 2 /Ti(C,N) cermet by RSPS: formation mechanism, shrinkage behavior, and mechanical properties

Combustion Synthesis of TiB-Ti Cermets