Abstract:Combustion synthesis (CS) is a well-known technique for manufacturing intermetallic compounds and intermetallic-matrix composite materials. This research focuses on fabricating NiAl-matrix composites with varying TiC/TiB2 contents as reinforcement, achieved by the combustion synthesis method. The chemical reactions that yield the final NiAl-TiC-TiB2 compounds were interpreted using thermodynamic calculations. The phase analysis and morphology of the composites were investigated using X-ray diffractometry (XRD) and scanning electron microscopy (SEM) characterization techniques, respectively. The findings demonstrate that the NiAl matrix contains evenly distributed TiC-TiB 2 ceramic-based particles, and no oxidation of reactants occurred during the combustion reaction. With an increase in the TiC-TiB 2 reinforcement phases from 0 to 15 Wt. %, the hardness of the NiAl-TiC-TiB 2 product significantly rose from 496 to 1015 Vickers, while the porosity increased from 24% to 39%, attributed to the reduced quantity of melted NiAl available to fill the pores. Examining tribological behavior in synthesized composites involved combining experimental-numerical methods, utilizing sliding wear tests and artificial neural network (ANN) modeling. The wear results revealed decreasing wear rates with reduced loads (from 35 N to 25, and 15 N) and higher TiC/TiB 2 ceramic content. Iron traces at C0 and C10 worn samples were 2.47 and 26.18 Wt. % respectively, which indicates enhanced hardness. The experimental data were used to train and test an artificial neural network (ANN) and statistical analysis revealed a remarkable accuracy of 91% for the ANN model in predicting friction coefficients within SHS-processed composites, as indicated by the R2 value of 0.91 and a MAPE of 6.47.

Research on TiC-Ni-Mo Composites by Combustion Synthesis

Research on TiC-Ni cermets by SHS and pseudo heat isostatic pressing

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

MECHANICAL PROPERTIES OF TiC-Ni PRODUCED BY SHS AT ROOM AND HIGH TEMPERATURES

One-step Preparation of Dense TiC1 − Xnx–ni3ti Cermet by Combustion Synthesis

TiC-Fe cermets fabricated by SHS

DENSE TiC-Al2O3-Fe CERMET FABRICATED BY SHS

Fast Preparation of ZTA-TiC-FeCrNi Cermets by High-Gravity Combustion Synthesis

Synthesis of TiB 2 /Ti(C,N) cermet by RSPS: formation mechanism, shrinkage behavior, and mechanical properties

Fabrication and wear behavior of TiC/TiB 2 -reinforced NiAl intermetallic matrix composites

Investigation of TiC formation during ball-milling of elemental titanium and carbon

Combustion synthesis of porous TiC/Ni composites under high gravity

Thermite Synthesis of TiC/FeNiCr Cermet with Double-Layer Structure

Synthesis and characterization of Mo@Ni core-shell composite powder-reinforced (W,Ti)C-based cermet

Effects of WC/TiC addition on the thermodynamic behavior of TiB 2 -based cermet during sintering process

Evolution of microstructure and interfacial characteristics of complete solid-solution Ti(C,N)-based cermets fabricated by mechanical activation and subsequent in situ carbothermal reduction

The Combustion Synthesis Of Si3n4-Tin-Sic Multiphase Ceramics

The Formation of Ni-Mo Alloy Phase in Ticn-Based Cermets

The spark plasma sintering of fine grained TiCN-Mo-Ni cermets

Formation Mechanism of Spherical TiC in Ni-Ti-C System during Combustion Synthesis

Combustion Synthesis of NiAl/TiC Multiphase Composites and their Related Microstructure