Abstract:Combustion synthesis (CS) is a well-known technique for manufacturing intermetallic compounds and intermetallic-matrix composite materials. This research focuses on fabricating NiAl-matrix composites with varying TiC/TiB2 contents as reinforcement, achieved by the combustion synthesis method. The chemical reactions that yield the final NiAl-TiC-TiB2 compounds were interpreted using thermodynamic calculations. The phase analysis and morphology of the composites were investigated using X-ray diffractometry (XRD) and scanning electron microscopy (SEM) characterization techniques, respectively. The findings demonstrate that the NiAl matrix contains evenly distributed TiC-TiB 2 ceramic-based particles, and no oxidation of reactants occurred during the combustion reaction. With an increase in the TiC-TiB 2 reinforcement phases from 0 to 15 Wt. %, the hardness of the NiAl-TiC-TiB 2 product significantly rose from 496 to 1015 Vickers, while the porosity increased from 24% to 39%, attributed to the reduced quantity of melted NiAl available to fill the pores. Examining tribological behavior in synthesized composites involved combining experimental-numerical methods, utilizing sliding wear tests and artificial neural network (ANN) modeling. The wear results revealed decreasing wear rates with reduced loads (from 35 N to 25, and 15 N) and higher TiC/TiB 2 ceramic content. Iron traces at C0 and C10 worn samples were 2.47 and 26.18 Wt. % respectively, which indicates enhanced hardness. The experimental data were used to train and test an artificial neural network (ANN) and statistical analysis revealed a remarkable accuracy of 91% for the ANN model in predicting friction coefficients within SHS-processed composites, as indicated by the R2 value of 0.91 and a MAPE of 6.47.

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

In Situal3ti–al2o3 Intermetallic Matrix Composite: Synthesis, Microstructure, and Compressive Behavior

Preparation and characterization of TiB2-Al2O3 composite powder by combustion synthesis process

Combustion Synthesis of NiAl/TiC Multiphase Composites and their Related Microstructure

In-situ synthesis of TiN and TiB2 compounds during reactive spark plasma sintering of BN–Ti composites

Combustion Synthesis of Ti(C,N) Powder

Structure Formation in the Combustion Synthesis of Al2O3–TiC Composites

In situ Preparation of BST(Nb)/SBN(Ti) Composites

Fabrication and wear behavior of TiC/TiB 2 -reinforced NiAl intermetallic matrix composites

Combustion synthesis of Ti(C, N) TiB2 composite powders under super gravity conditions

Synthesis of Al{sub 2}o{sub 3}-Tic and Al{sub 2}o{sub 3}-Tib{sub 2} Composite Powders by Combustion Method

Combustion synthesis of ternary carbide Ti3AlC2 in Ti–Al–C system

Effects of Ti/Al Ratio on Formation of Ti-Al Intermetallics/TiB2 Composites by SHS from Ti-Al-B Powder Mixtures

Kinetic Process of Combustion Synthesis of Ternary Carbide Ti<sub>3</sub>AlC<sub>2</sub>

In Situ Formation of Titanium Diboride/Magnesium Titanate Composites by Magnesiothermic-Based Combustion Synthesis

Combustion synthesis ternary carbide Ti2AlC1-x

Synthesis and Mechanical Properties of TiB2/Ti2AlN Composites Fabricated by Hot Pressing Sintering

In-Situ Reactive Synthesis of AlN-SiC Composites and Solid Solutions

Effects of Tic Addition on Combustion Synthesis of Ti(2)Alc Powders