Abstract:The microstructural evolution of TiAl matrix composites with a novel network distribution of Ti2AlN particle reinforcement was studied. The composites were synthesized by reaction hot pressing method using pure Al and nitrided Ti powders as initial materials. Pure Ti powders nitrided at 600°C for a certain time in an atmosphere of flowing nitrogen turned into new compound Ti(N) powders, which have a shell of titanium nitrides (such as TiN, Ti2N and TiN0.3) and a core of Ti–N solid solution. Within the composites synthesized, Ti2AlN particles, produced by in situ reaction, exhibit a network distribution. The special shell/core structure of the compound Ti(N) powders contributes to this architecture. Nitriding time of the Ti powders greatly affects the microstructure of the composites. Increasing the nitriding time is beneficial to the distribution of Ti2AlN particles in a continuous network form. However, too long nitriding time can result in the aggregation of Ti2AlN particles and thus destroy the uniformity of the network structure. The in-situ synthesized Ti2AlN/TiAl composites with uniform network structure have a superior mechanical property, and their compressive strengths at 800°C and 1000°C are 1112MPa and 687MPa, respectively.

Synthesis and Mechanical Properties of TiB2/Ti2AlN Composites Fabricated by Hot Pressing Sintering

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

In Situ TiBw/Ti–6Al–4V Composites with Novel Reinforcement Architecture Fabricated by Reaction Hot Pressing

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Microstructure and Mechanical Properties of TiB2-Al2O3 Composites

Microstructure and mechanical properties of TiB 2 -Al 2 O 3 composites

Microstructure and Mechanical Properties of TiN–TiB2–hBN Composites Fabricated by Reactive Hot Pressing Using TiN–B Mixture

Fabrication of in Situ Ti 2 AlN/TiAl Composites by Reaction Hot Pressing and Their Properties

Processing, Microstructural Characterization and Mechanical Properties of in Situ Ti3AlC2/TiAl3 Composite by Hot Pressing

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Microstructure and mechanical properties of TiB2–B4C ceramics fabricated by hot-pressing

Microstructural Characteristics and Evolution of Ti2AlN/TiAl Composites with a Network Reinforcement Architecture During Reaction Hot Pressing Process

Microstructure and mechanical properties of Ti3(Al,Ga)C2/Al2O3 composites prepared by in situ reactive hot pressing

MICROSTRUCTURE AND ELECTROCONDUCTIVITY OF TiN-Al2O3 COMPOSITES PREPARED BY HOT-PRESSING

In Situ Synthesis and Properties of Ti<sub>3</sub>AlC<sub>2</sub>/TiB<sub>2</sub> Composites

Preparation and Mechanical Properties of TiN-Al<sub>2</sub>O<sub>3</sub> Refractory Composites

Preparation and characteristics of Ti3AlC2 -Al3Ti/Al composite materials synthesized from pure Al and Ti3AlC2 powders

Microstructure And Properties Of Tib2p/Al Composites Fabricated By Squeeze Casting Technology

Mechanical Properties and Microstructure of Al<sub>2</sub>O<sub>3</sub>-Ti<sub>3</sub>SiC<sub>2</sub> Ceramic Composites

Mechanical Properties and Electrical Conductivity of Tin-Al2o3 Nanocomposites

Preparation and Properties of Titanium Diboride Ceramic Matrix Reinforced by Carbon Nanotubes