Abstract:Combustion synthesis (CS) is a well-known technique for manufacturing intermetallic compounds and intermetallic-matrix composite materials. This research focuses on fabricating NiAl-matrix composites with varying TiC/TiB2 contents as reinforcement, achieved by the combustion synthesis method. The chemical reactions that yield the final NiAl-TiC-TiB2 compounds were interpreted using thermodynamic calculations. The phase analysis and morphology of the composites were investigated using X-ray diffractometry (XRD) and scanning electron microscopy (SEM) characterization techniques, respectively. The findings demonstrate that the NiAl matrix contains evenly distributed TiC-TiB 2 ceramic-based particles, and no oxidation of reactants occurred during the combustion reaction. With an increase in the TiC-TiB 2 reinforcement phases from 0 to 15 Wt. %, the hardness of the NiAl-TiC-TiB 2 product significantly rose from 496 to 1015 Vickers, while the porosity increased from 24% to 39%, attributed to the reduced quantity of melted NiAl available to fill the pores. Examining tribological behavior in synthesized composites involved combining experimental-numerical methods, utilizing sliding wear tests and artificial neural network (ANN) modeling. The wear results revealed decreasing wear rates with reduced loads (from 35 N to 25, and 15 N) and higher TiC/TiB 2 ceramic content. Iron traces at C0 and C10 worn samples were 2.47 and 26.18 Wt. % respectively, which indicates enhanced hardness. The experimental data were used to train and test an artificial neural network (ANN) and statistical analysis revealed a remarkable accuracy of 91% for the ANN model in predicting friction coefficients within SHS-processed composites, as indicated by the R2 value of 0.91 and a MAPE of 6.47.

Combustion Synthesis of NiAl/TiC Multiphase Composites and their Related Microstructure

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

Structural Formation and Mechanism in Combustion Synthesis of Nitrogen Ceramics (AIN, Si<sub>3</sub>N<sub>4</sub> and AIN-SiC)

Structure Formation in the Combustion Synthesis of Al2O3–TiC Composites

Effects of different Ti/C and Al contents on combustion synthesized Ti3AlC2 powders in the Ti-Al-C system

Kinetic Process of Combustion Synthesis of Ternary Carbide Ti<sub>3</sub>AlC<sub>2</sub>

Combustion synthesis of ternary carbide Ti3AlC2 in Ti–Al–C system

Combustion synthesis ternary carbide Ti2AlC1-x

Study on the Synthesis of Ti3AlC Powder by Combustion

Mlicrostructure of TiAl/TiC cermet joint bonded by combustion synthesis

Layered growth of Ti2AlC and Ti3AlC2 in combustion synthesis

Microstructures, Densification and Mechanical Properties of TiC–Al2O3–Al Composite by Field-Activated Combustion Synthesis

Fabrication and wear behavior of TiC/TiB 2 -reinforced NiAl intermetallic matrix composites

Effects of different Al contents on combustion synthesis of Ti3AlC2 powders in the Ti-Al-C system

Effects of TiAl3 addition on combustion synthesis of Ti3AlC

Microstructure of TiAl/TiC cermet joint bonded by combustion synthesis

Effects of TiAl additions on combustion synthesis of Ti3AlC2 powders

Combustion Synthesis Ternary Carbide Ti2alc1-X Powders

EFFECTS OF TiAl ADDITION ON COMBUSTION SYNTHESIS OF Ti_2AlC

Preparation of ti-al based nanophase composite powder by mechanical alloying

Combustion Synthesis and Thermal Stability of Ti3AlC2