Abstract:<p>Ti(C,N)-based cermets were fabricated using section vacuum sintering. The density and shrinkage ratio of sintered samples were recorded and analyzed. Phase transition, microstructure and interface behaviors of cermets were examined by transmission electron microscope, X-ray diffractometer and scanning electron microscope. As the sintering temperature rising, the number of pores in cermets was decreased and the density of samples was increased. Moreover, with the progress of sintering, atoms of various elements were constantly diffusing and gathering, affecting the formation of different microstructure, and the angle and intensity of each XRD peak were also constantly changing slightly, or disappearing at a certain temperature. These relevant results indicated that the proportion of heavy element to Ti in the hard phase would affect its lattice parameter. After the appearance of liquid phase, the densification mechanism changed from surface diffusion to grain boundary diffusion, thus accelerating the densification. With the proceeding of sintering process, various microstructures were formed such as core - rim/rimless structure. Finally, the process of interface change in core rimless phase transition was discussed. This rim phase, formed in solid state sintering process while failing to develop into core-rim structure after liquid sintering, was formed by some heavy elements short-range diffusion into core phase. The orientation different and the misfit between this core and rim were relatively large. While after liquid sintering, the semi-coherency or even coherency state at the interface of core-rimless and binder was formed.</p>

Investigation on microstructure of TiC-Fe cermets prepared by SHS/PHIP

TiC-Fe cermets fabricated by SHS

Microstructures of TiC-Al2O3-Fe composites prepared by SHS/PHIP

Microstructure and formation mechanism of TiC-30Fe cermet fabricated by SHS

DENSE TiC-Al2O3-Fe CERMET FABRICATED BY SHS

PROPERTIES OF TiC-Al2O3/Fe COMPOSITES PREPARED BY SHS/PHIP

INFLUENCE OF Ni CONTENT ON TiC-Ni CERMETS BY SHS/PHIP

Experimental Investigation and Thermodynamic Analysis of TiC–Fe Cermets with Mo Additions

MECHANICAL PROPERTIES OF TiC-Ni PRODUCED BY SHS AT ROOM AND HIGH TEMPERATURES

Microstructure and resisting thermal shock behaviors of TiC-Al2O3/Fe functionally graded materials prepared by SHS/PHIP

Microstructural evolution and phase transition mechanism of Ti(C,N)-based cermets during vacuum sintering process

Densification, Microstructure and Mechanical Performance of TiC/Fe Composites by Spark Plasma Sintering

Effect of Copper Content on the Microstructures and Properties of Tib2 Based Cermets by Shs

The effect of carbon source and molar ratio in Fe–Ti–C system on the microstructure and mechanical properties of in situ TiC/Fe composites

Evolution of the Microstructure and Phase Transformation of Nano-Ti(CN) Based Cermets during Sintering Process

Microstructure evolution of Fe-Ti-C system synthesized by low temperature combustion induced in electric field

Thermite Synthesis of TiC/FeNiCr Cermet with Double-Layer Structure

Dense TiC-Al2O3 composites fabricated by SHS

Microstructure, Mechanical Properties, and Sintering Behavior of Ti3O-Fe2TiO4-TiC Composites

Research on TiC-Ni cermets by SHS and pseudo heat isostatic pressing

Synthesis of TiB 2 /Ti(C,N) cermet by RSPS: formation mechanism, shrinkage behavior, and mechanical properties