Abstract:We reported a low-temperature solution-processed method for the fabrication of AlOx thin films in the memory device. The detailed study is carried out to figure out the effect of varying annealing temperatures (150, 200, 250, 300, and 350 degrees C) on resistive switching characteristics of solution-processed aluminum oxide dielectric. The dielectric properties of AlOx films under different annealing temperatures were evaluated by atomic force microscopy (AFM), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) firstly. Then the AlOx films were used as the switching dielectric layer for a variety of low-temperature solution-processed oxide resistive random access memory (RRAM) devices. It was found that forming voltage increased with increasing annealing temperature and forming free behavior could be achieved by 200 degrees C sample. No repeatable resistance switching characteristics were observed in the devices with minimum (150 degrees C) and maximum (350 degrees C) annealing temperatures. Compared with the ALD-derived AlOx based RRAM devices in previous study, enhanced performance like small forming voltage, large resistance ratio (<180) and narrow resistance and voltage distribution was achieved by the solution-processed AlOx based ones at the optimized low annealing temperatures of 200 to 250 degrees C, which would be applied in the bionic circuit simulated by synapses and neural networks. All three samples (200, 250, and 300 degrees C) obtained switching endurance up to 300 cycles and data retention over 10(4) s. Furthermore, the solution based fabrication method also has the potential in the flexible memory application due to the merit of the low-temperature process.

Low temperature improvement method on Zn:SiOx resistive random access memory devices

Low Temperature Improvement Method on ${\rm Zn{:}SiO}_{x}$ Resistive Random Access Memory Devices

Improvement of Hafnium Oxide Resistive Memory Performance Through Low-Temperature Supercritical Oxidation Treatments

Improvement mechanism of resistance random access memory with supercritical CO 2 fluid treatment

mprovement mechanism of resistance random access memory with upercritical CO 2 fluid treatment uan

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

Improvement of Bipolar Switching Properties of Gd:SiO x RRAM Devices on Indium Tin Oxide Electrode by Low-Temperature Supercritical CO 2 Treatment

Recovery of Failed Resistive Switching Random Access Memory Devices by A Low-Temperature Supercritical Treatment

Improvement of Resistive Switching Characteristic in Silicon Oxide-Based RRAM Through Hydride- Oxidation on Indium Tin Oxide Electrode by Supercritical CO<sub>2</sub> Fluid

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Enhanced Resistive Switching Performance of Aluminum Oxide Dielectric with a Low Temperature Solution-Processed Method

Stable resistive switching characteristics of ZrO2-based memory device with low-cost

Ultra-Low Switching Voltage Induced by Inserting SiO 2 Layer in Indium–Tin–Oxide-Based Resistance Random Access Memory

Improvement of Resistive Switching Characteristics in Zinc Oxide-Based Resistive Random Access Memory by Ammoniation Annealing

A low-temperature method for improving the performance of sputter-deposited ZnO thin-film transistors with supercritical fluid

Characteristics and Mechanisms of Silicon-Oxide-Based Resistance Random Access Memory

Temperature Dependence of Electrical Properties and Conduction Mechanism of SiN<sub><i>x</i></sub>-Based Resistive Random Access Memory

Improved Performance of HfxZnyO‐Based RRAM and Its Switching Characteristics Down to 4 K Temperature

The Ultra‐Low Power Performance of A‐sinxoy:H Resistive Switching Memory

Silicon Introduced Effect On Resistive Switching Characteristics Of Wox Thin Films

Temperature Dependence of Electrical Properties and Conduction Mechanism of SiN<sub>x</sub>‐based RRAM