Abstract:In this study, a solution-processed bilayer structure ZrO2/SnO2 resistive switching random access memory(RRAM) is presented for the first time. The precursors of SnO2 and ZrO2 are Tin(II) acetylacetonate (Sn(AcAc)2) and zirconium acetylacetonate (Zr(C5H7O2)4), respectively. The top electrode was deposited with Ti using an E-beam evaporator, and the bottom electrode used an ITO glass wafer. We created three devices: SnO2 single-layer, ZrO2 single-layer, and ZrO2/SnO2 bilayer devices, to compare resistive switching(RS) characteristics such as the I-V curve and endurance properties. The SnO2 and ZrO2 single-layer devices showed on/off ratios of approximately 2 and 51, respectively, along with endurance switching cycles exceeding 50 and 100 DC cycles. The bilayer device attained stable RS characteristics over 120 DC endurance switching cycles and increased on/off ratio ~2.97 x 102. Additionally, the ZrO2/SnO2 bilayer bipolar switching mechanism was explained by considering the Gibbs free energy(ΔGo) difference in the ZrO2 and SnO2 layers, where the formation and rupture of conductive filaments were caused by oxygen vacancies. The disparity in the concentration of oxygen vacancies, as indicated by the Gibbs free energy difference between ZrO2 (ΔGo = -1100 kJ/mol) and SnO2 (ΔGo = -842.91 kJ/mol) implied that ZrO2 exhibited a higher abundance of oxygen vacancies compared to SnO2, resulting in improved endurance and On/Off ratio. X-ray Photoelectron Spectroscopy (XPS) analyzed oxygen vacancies in ZrO2 and SnO2 thin films. The resistance switching characteristics were improved due to the bilayer structure, which combines a higher oxygen vacancy concentration in one layer with a lower oxygen vacancy concentration in the switching layer. This configuration reduces the escape of oxygen vacancies to the electrode during resistive switching.

Space electric field concentrated effect for Zr:SiO 2 RRAM devices using porous SiO 2 buffer layer

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

Effect of SiCN thin film interlayer for ZnO-based RRAM

Performance And Characteristics Of Double Layer Porous Silicon Oxide Resistance Random Access Memory

High performance of graphene oxide-doped silicon oxide-based resistance random access memory

Low Temperature Improvement Method on ${\rm Zn{:}SiO}_{x}$ Resistive Random Access Memory Devices

Characteristics and Mechanisms of Silicon-Oxide-Based Resistance Random Access Memory

Resistive switching mechanism of Cu doped ZrO2-based RRAM

Effect of Interface Layer Engineering on Resistive Switching Characteristics of ZrO 2 -Based Resistive Switching Devices

Resistive switching characteristics of sol-gel derived La2Zr2O7 thin film for RRAM applications

Design of a Two-Layer Structure to Significantly Improve the Performance of Zinc Oxide Resistive Memory

Unveiling the influence of surrounding materials and realization of multi-level storage in resistive switching memory

Li-Doping Effect on Characteristics of ZnO Thin Films Resistive Random Access Memory

Percolation Theory Based Model of Conduction Mechanism and Characteristic Contradiction in ZnO RRAM

The Effect of High/low Permittivity in Bilayer HfO2/BN Resistance Random Access Memory

Complementary Resistive Switching Behavior Induced by Varying Forming Current Compliance in Resistance Random Access Memory

Hopping Conduction Distance Dependent Activation Energy Characteristics of Zn:Sio2 Resistance Random Access Memory Devices

Silicon Introduced Effect On Resistive Switching Characteristics Of Wox Thin Films

A Resistive Device with Electrolyte As Active Electrode

Atomic Layer Deposition of Ga2O3/ZnO Composite Films for High-Performance Forming-Free Resistive Switching Memory.

Improved resistive switching characteristics of solution processed ZrO 2 /SnO 2 bilayer RRAM via oxygen vacancy differential