Abstract:The bipolar resistive switching (BRS) devices were investigated for RRAM applications in a MIM structure based on sol-gel derived amorphous La2Ti2O7 (LTO) thin films. The influences on the resistive switching (RS) properties according to the film thickness, electrode, annealing temperature and post metal annealing (PMA) treatment were also discussed. Moreover, RS performance of the RRAMs is affected by the work functions of electrodes. The RS characteristics of the devices are controlled by oxygen vacancies and the content of oxygen vacancies was seriously reduced after annealing, which led to a significant decrease of the endurance. In addition, PMA treatment increased the content of oxygen vacancies attributed to the forming of AlOx interface layer and made Al ions diffuse into the films to form bridges, which improved the RS performance of the devices. Consequently, the sample with 300 °C PMA exhibits the optimized RS properties with maximum switching cycles of 2674, a Ron/Roff ratio of 102, low operating voltages (VSet/VReset = 1.32 V/−1.21 V), and a retention time of over 104 s at room temperature and 85 °C, indicating the promising potential for practical RRAM applications. Conduction mechanism of all devices with Al top electrode were described by trap-controlled space-charge limited current (SCLC) and ohmic conduction.

Improvement of Bipolar Switching Properties of Gd:SiO x RRAM Devices on Indium Tin Oxide Electrode by Low-Temperature Supercritical CO 2 Treatment

Schottky Emission Distance And Barrier Height Properties Of Bipolar Switching Gd:Siox Rram Devices Under Different Oxygen Concentration Environments

Low Temperature Improvement Method on ${\rm Zn{:}SiO}_{x}$ Resistive Random Access Memory Devices

Low temperature improvement method on Zn:SiOx resistive random access memory devices

Activation Energy and Bipolar Switching Properties for the Co-Sputtering of ITOX:SiO2 Thin Films on Resistive Random Access Memory Devices

Recovery of Failed Resistive Switching Random Access Memory Devices by A Low-Temperature Supercritical Treatment

Illumination Effect on Bipolar Switching Properties of Gd:SiO 2 RRAM Devices Using Transparent Indium Tin Oxide Electrode

Improvement mechanism of resistance random access memory with supercritical CO 2 fluid treatment

Self- Compliance Unipolar Resistive Switching and Mechanism of Cu/SiO2/TiN RRAM Devices

The voltage-triggered SET mechanism and self-compliance characteristics in intrinsic unipolar SiOx-based resistive switching memory

Electrical characterization of sol-gel La2Ti2O7 films for resistive random access memory applications

Unipolar Resistive Switching and Mechanism in Gd-doped-TiO2-based Resistive Switching Memory Devices

Oxygen-ion-migration-modulated Bipolar Resistive Switching and Complementary Resistive Switching in Tungsten/indium Tin Oxide/gold Memory Device

The role of dianglin bonds in resistance switching behaviors of SiOx - Based RRAM

Multilevel Resistive Switching in Ag/Sio2/Pt Resistive Switching Memory Device

Characteristics and Mechanisms of Silicon-Oxide-Based Resistance Random Access Memory

High performance of graphene oxide-doped silicon oxide-based resistance random access memory

Multilevel Resistive Switching Characteristics In Ag/Sio2/Pt Rram Devices

Improvement of Hafnium Oxide Resistive Memory Performance Through Low-Temperature Supercritical Oxidation Treatments

Self-Selection Effects and Modulation of Taox Resistive Switching Random Access Memory with Bottom Electrode of Highly Doped Si

Engineering Oxide Resistive Switching Materials for Memristive Device Application