Abstract:Due to its high versatility and cost-effectiveness, solution process has a remarkable advantage over physical or chemical vapor deposition (PVD/CVD) methods in developing flexible resistive random-access memory (RRAM) devices. However, the reported solution-processed binary oxides, the most promising active layer materials for their compatibility with silicon-based semiconductor technology, commonly require high-temperature annealing (>145 °C) and the RRAMs based on them encounter insufficient flexibility. In this work, an amorphous and uniform SiOx active layer was prepared by irradiating an inorganic polymer, perhydropolysilazane, with a vacuum ultraviolet of 172 nm at room temperature. The corresponding RRAM showed typical bipolar resistance switching with a forming-free behavior. The device on polyimide film exhibited outstanding flexibility with a minimum bending radius of 0.5 mm, and no performance degradation was observed after bending 2000 times with a radius of 2.3 mm, which is the best among the reported solution-processed binary oxide-based RRAMs and can even rival the performance of PVD/CVD-based devices. This room-temperature solution process and the afforded highly flexible RRAMs have vast prospects for application in smart wearable electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16556?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16556</a>.XRD patterns of the Au substrate and VUV-irradiation SiOx films on Au substrate (Figure S1); the SEM image of the SiOx layer on Au/glass substrate (Figure S2); the electroforming-free performance of the prepared device (Figure S3); I–V curves in a semilogarithmic plot of the Ag/SiOx/Au/glass device in vacuum environment (7.4 × 10–3 Pa) (Figure S4); the wide-scan XPS spectra of the SiOx fabricated with different heating temperatures and VUV-irradiation processes (Figure S5); the I–V curve for the 8 nm device after a few cycles and the 50 nm device (Figure S6); the relationship between the coefficient of variation (σ/μ) and size (Figure S7); the I–V curve of the HRS fitting with SCLC, P-F emission, and thermionic emission mechanism; the I–V curves of the HRS fitting with the Schottky emission mechanism at different temperatures from 303 to 343 K (Figure S8); the I–V measurement result during 349 cycles corresponding to <a class="internalNav" href="#fig3">Figure </a><a class="internalNav" href="#fig3">3</a>c drawn in a diagram (Figure S9); the I–V measurement result for Ti/SiOx/Au/glass during 108 cycles (Figure S10); the resistance of HRS and LRS as a function of the bending strain in outward direction (Figure S11); the change of the resistance with bending numbers in outward direction with a radius of 0.5 mm (Figure S12); the nano-indentation test (by Agilent Nano Indenter G200) for the SiOx layer (Figure S13); the device-to-device data corresponding to <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a,c,d, respectively (Figure S14); the pictures of the hand-made hinge structure (Figure S15); and the details of the bending experiments (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16556/suppl_file/am0c16556_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Presetting Conductive Pathway Induced the Switching Uniformity Evolution of A-Sinx:H Resistive Switching Memory.

Tracing the Si Dangling Bond Nanopathway Evolution ina-SiN<sub>x</sub>:H Resistive Switching Memory by the Transient Current

Tracing the Si Dangling Bond Nanopathway Evolution ina-SiNx:H Resistive Switching Memory by the Transient Current

a-SiN x :H-based ultra-low power resistive random access memory with tunable Si dangling bond conduction paths

Nanocrystalline Si Pathway Induced Unipolar Resistive Switching Behavior from Annealed Si-rich SiNx/SiNy Multilayers

Hybrid Channel Induced Forming-Free Performance in Nanocrystalline-Si:H/a-sinx:h Resistive Switching Memory.

Resistive Switching Characteristics of Pt/TaOx/HfNx Structure and Its Performance Improvement

Investigations of Conduction Mechanisms of the Self-Rectifying N+si-Hfo2–ni RRAM Devices

Unipolar Resistive Switching with Forming-Free and Self-Rectifying Effects in Cu/HfO2/n-Si Devices

The voltage-triggered SET mechanism and self-compliance characteristics in intrinsic unipolar SiOx-based resistive switching memory

Improved Resistive Switching Uniformity of SiO2 Electrolyte-Based Resistive Random Access Memory Device with Cu Oxidizable Electrode

Comprehensive Trap-Level Study in Siox-Based Resistive Switching Memory

Tunable Si Dangling Bond Pathway Induced Forming-Free Hydrogenated Silicon Carbide Resistive Switching Memory Device

Improvement of Resistive Switching Uniformity by Introducing A Thin Nbox Interface Layer

The Ultra‐Low Power Performance of A‐sinxoy:H Resistive Switching Memory

Room-Temperature, Solution-Processed SiO x via Photochemistry Approach for Highly Flexible Resistive Switching Memory

Fully Si compatible SiN resistive switching memory with large self-rectification ratio

CMOS-compatible wafer-scale Si subulate array for superb switching uniformity of RRAM with localized nanofilaments

Silicon Introduced Effect On Resistive Switching Characteristics Of Wox Thin Films

Multilevel Resistive Switching in Ag/Sio2/Pt Resistive Switching Memory Device

High switching uniformity and 50 fJ/bit energy consumption achieved in amorphous silicon-based memristive device with an AgInSbTe buffer layer