Abstract:Due to its high versatility and cost-effectiveness, solution process has a remarkable advantage over physical or chemical vapor deposition (PVD/CVD) methods in developing flexible resistive random-access memory (RRAM) devices. However, the reported solution-processed binary oxides, the most promising active layer materials for their compatibility with silicon-based semiconductor technology, commonly require high-temperature annealing (>145 °C) and the RRAMs based on them encounter insufficient flexibility. In this work, an amorphous and uniform SiOx active layer was prepared by irradiating an inorganic polymer, perhydropolysilazane, with a vacuum ultraviolet of 172 nm at room temperature. The corresponding RRAM showed typical bipolar resistance switching with a forming-free behavior. The device on polyimide film exhibited outstanding flexibility with a minimum bending radius of 0.5 mm, and no performance degradation was observed after bending 2000 times with a radius of 2.3 mm, which is the best among the reported solution-processed binary oxide-based RRAMs and can even rival the performance of PVD/CVD-based devices. This room-temperature solution process and the afforded highly flexible RRAMs have vast prospects for application in smart wearable electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16556?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16556</a>.XRD patterns of the Au substrate and VUV-irradiation SiOx films on Au substrate (Figure S1); the SEM image of the SiOx layer on Au/glass substrate (Figure S2); the electroforming-free performance of the prepared device (Figure S3); I–V curves in a semilogarithmic plot of the Ag/SiOx/Au/glass device in vacuum environment (7.4 × 10–3 Pa) (Figure S4); the wide-scan XPS spectra of the SiOx fabricated with different heating temperatures and VUV-irradiation processes (Figure S5); the I–V curve for the 8 nm device after a few cycles and the 50 nm device (Figure S6); the relationship between the coefficient of variation (σ/μ) and size (Figure S7); the I–V curve of the HRS fitting with SCLC, P-F emission, and thermionic emission mechanism; the I–V curves of the HRS fitting with the Schottky emission mechanism at different temperatures from 303 to 343 K (Figure S8); the I–V measurement result during 349 cycles corresponding to <a class="internalNav" href="#fig3">Figure </a><a class="internalNav" href="#fig3">3</a>c drawn in a diagram (Figure S9); the I–V measurement result for Ti/SiOx/Au/glass during 108 cycles (Figure S10); the resistance of HRS and LRS as a function of the bending strain in outward direction (Figure S11); the change of the resistance with bending numbers in outward direction with a radius of 0.5 mm (Figure S12); the nano-indentation test (by Agilent Nano Indenter G200) for the SiOx layer (Figure S13); the device-to-device data corresponding to <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a,c,d, respectively (Figure S14); the pictures of the hand-made hinge structure (Figure S15); and the details of the bending experiments (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16556/suppl_file/am0c16556_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

The Ultra‐Low Power Performance of A‐sinxoy:H Resistive Switching Memory

Plasma Oxidation Induced Ultra-Low Power Performance From A-Sinx:H Resistive Switching Memory

a-SiN x :H-based ultra-low power resistive random access memory with tunable Si dangling bond conduction paths

Forming-free Performance of A-Sin X :H-Based Resistive Switching Memory Obtained by Oxygen Plasma Treatment

Resistive Switching Characteristics of Pt/TaOx/HfNx Structure and Its Performance Improvement

A Novel Nitrogen-Doped SiOx Resistive Switching Memory with Low Switching Voltages

Complementary Metal Oxide Semiconductor Compatible Hf-Based Resistive Random Access Memory with Ultralow Switching Current/Power

Ultra-Low Switching Voltage Induced by Inserting SiO 2 Layer in Indium–Tin–Oxide-Based Resistance Random Access Memory

Influneces of Different Oxygen Partial Pressures on Switching Properties of Ni/HfOx/TiN Resistive Switching Devices

Room-Temperature, Solution-Processed SiO x via Photochemistry Approach for Highly Flexible Resistive Switching Memory

Hybrid Channel Induced Forming-Free Performance in Nanocrystalline-Si:H/a-sinx:h Resistive Switching Memory.

Uniform, Fast, and Reliable LixSiOy-Based Resistive Switching Memory

Low-Power Resistive Switching Characteristic in HfO2/TiOx Bi-Layer Resistive Random-Access Memory.

Interface Engineering With Mos2-Pd Nanoparticles Hybrid Structure For A Low Voltage Resistive Switching Memory

Low Temperature Improvement Method on ${\rm Zn{:}SiO}_{x}$ Resistive Random Access Memory Devices

Ni Electrode Unipolar Resistive RAM Performance Enhancement by $\hbox{alo}_{y}$ Incorporation into $\hbox{hfo}_{x}$ Switching Dielectrics

Activation Energy and Bipolar Switching Properties for the Co-Sputtering of ITOX:SiO2 Thin Films on Resistive Random Access Memory Devices

Low-Power Resistive Switching Characteristics in TiN/TaON/SiO2/Pt RRAM Devices for Neuromorphic Applications

Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering

Enhanced Resistive Switching Performance of Aluminum Oxide Dielectric with a Low Temperature Solution-Processed Method

Nitrogen-Oxyanion-Doped HfO2 Resistive Random-Access Memory with Chemically Enhanced Forming