Abstract:H doping can enhance the performance of ZnO thin-film transistors (TFTs) to a certain extent, and the design of double active layers is an effective way to further improve a device’s performance. However, there are few studies on the combination of these two strategies. We fabricated TFTs with ZnO:H (4 nm)/ZnO (20 nm) double active layers by magnetron sputtering at room temperature, and studied the effect of the hydrogen flow ratio on the devices’ performance. ZnO:H/ZnO-TFT has the best overall performance when H2/(Ar + H2) = 0.13% with a mobility of 12.10 cm2/Vs, an on/off current ratio of 2.32 × 107, a subthreshold swing of 0.67 V/Dec, and a threshold voltage of 1.68 V, which is significantly better than the performance of single active layer ZnO:H-TFTs. This exhibits that the transport mechanism of carriers in double active layer devices is more complicated. On one hand, increasing the hydrogen flow ratio can more effectively suppress the oxygen-related defect states, thus reducing the carrier scattering and increasing the carrier concentration. On the other hand, the energy band analysis shows that electrons accumulate at the interface of the ZnO layer close to the ZnO:H layer, providing an additional path for carrier transport. Our research exhibits that the combination of a simple hydrogen doping process and double active layer construction can achieve the fabrication of high-performance ZnO-based TFTs, and that the whole room temperature process also provides important reference value for the subsequent development of flexible devices.

A low-temperature method for improving the performance of sputter-deposited ZnO thin-film transistors with supercritical fluid

Eco-Friendly, Water-Induced In2O3 Thin Films for High-Performance Thin-Film Transistors and Inverters

Low-Temperature ZnO TFTs Fabricated by Reactive Sputtering of Metallic Zinc Target

Enhanced Performance of ZnO Thin-Film Transistors with ZnO Dual-Active-layer

Ultra-Violet Light Enhanced Super Critical Fluid Treatment In In-Ga-Zn-O Thin Film Transistor

Supercritical Fluid Oxidation Methodology on A‐izao Thin‐Film Transistors

Improving Performance of All-Carbon-Nanotube Thin-Film Transistors by Low Temperature Supercritical CO2 Fluid Activation

High-Performance ZnO Thin-Film Transistors Prepared by Atomic Layer Deposition

Low Temperature and High Performance ZnSnO Thin Film Transistors Engineered by In-Situ Thermal Manipulation

Solution-Processed Zinc Oxide Thin-Film Transistors with a Low-Temperature Polymer Passivation Layer

A Study of Deposition/Annealing Cyclic Method to Enhance the Performance of Zinc-Tin Oxide Thin-Film Transistor by Ultrasonic Spray Pyrolysis Deposition

Reactive Radiofrequency Sputtering-Deposited Nanocrystalline ZnO Thin-Film Transistors

Performance enhancement of ATZO TFTs by component control and post treatment

High-Performance Thin-Film Transistors with ZnO:H/ZnO Double Active Layers Fabricated at Room Temperature

High-performance Si-doped ZnO Thin-film Transistors Fabricated on Flexible Plastic Substrate at Low Temperature

Performance Enhancement of Fully Transparent Tin-Doped Zinc Oxide Thin-Film Transistors Fabricated by Sputtering at Low Temperature

Low temperature improvement method on Zn:SiOx resistive random access memory devices

Improvement of the Long-Term Stability of ZnSnO Thin Film Transistors by Tungsten Incorporation Using a Solution-Process Method

One-Step Synergistic Treatment Approach for High Performance Amorphous InGaZnO Thin-Film Transistors Fabricated at Room Temperature

Stability Enhancement of Low Temperature Thin-Film Transistors with Atomic-Layer-Deposited Zno:Al Channels

Performance Improvement of Atomic Layer-Deposited ZnO/Al2O3Thin-Film Transistors by Low-Temperature Annealing in Air