Abstract:Amorphous La2Zr2O7 thin films were fabricated using the sol-gel method and the bipolar resistive switching behavior of the metal(Al or Ti)/LZO/ITO devices were systematically investigated. The effect of film thickness, top electrodes, and post-annealing treatment conditions on the RS characteristics of the La2Zr2O7 thin films were also discussed. The film thickness increases significantly as the number of spin-coating layers increases, leading to a higher operation voltage and fewer switching cycle times. In addition, the RS properties of the devices are affected by the work function difference between the top and the bottom electrodes. All devices exhibited similar conduction mechanisms, which are described by the ohmic conduction in the low resistance state and space-charge limited current in the high resistance state. Moreover, the RS performance can be profoundly improved by the post-annealing treatment because of the formation of a thicker AlOx interface layer between the Al and LZO thin films, which was revealed via TEM images. The optimized RRAM performances are 1971 cycle times and high stable retention time for over 105 with a Ron/Roff ratio of around 101 at a post-annealing temperature of 300°C. The multilevel RS performances are also observed. Besides, this device maintained a large enough memory window in the retention test at 85°C thermal stress. The longer life is to be expected.

Improved Resistive Switching Characteristics Of Ag-Doped Zro2 Films Fabricated By Sol-Gel Process

Resistive switching in Nb-doped SrZrO3 memory films: An effective approach with a Cu modulation layer

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Current–voltage characteristics of sol–gel derived SrZrO3 thin films for resistive memory applications

Improvement Of Resistive Switching Properties In Zro2-Based Reram With Implanted Ti Ions

La/Al-doped ZrO<sub>2</sub> Thin-Film Resistive Random Access Memory Devices by Sol-gel Method for Transparent Solid-State Circuit Systems

Resistance switching study of stoichiometric ZrO2 films for non-volatile memory application

Resistive switching mechanism of Cu doped ZrO2-based RRAM

Improvement of Resistive Switching Properties in $ \Hbox{zro}_{2}$-Based ReRAM with Implanted Ti Ions

Enhancement of Resistive Switching Performance in Hafnium Oxide (HfO2) Devices via Sol-Gel Method Stacking Tri-Layer HfO2/Al-ZnO/HfO2 Structures

Improvement of Resistive Switching Properties in <formula formulatype="inline"><tex Notation="TeX">$ \hbox{ZrO}_{2}$</tex></formula>-Based <emphasis emphasistype="roman">ReRAM</emphasis> With Implanted Ti Ions

Highly Transparent Bipolar Resistive Switching Memory in Zr0.5Hf0.5O2 Films with Amorphous Semiconducting In–Ga–Zn–O As Electrode

Resistive switching mechanism of Ag/ZrO 2 :Cu/Pt memory cell

Resistive Switching Memory Effect of ZrO2 Films with Zr+ Implanted

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Ionic Doping Effect In Zro2 Resistive Switching Memory

Highly Improved Performance in Zr0.5Hf0.5O2 Films Inserted with Graphene Oxide Quantum Dots Layer for Resistive Switching Non-Volatile Memory

Reproducible Unipolar Resistance Switching in Stoichiometric ZrO2 Films

Improvement of Resistive Switching Properties in ZrO2- Based ReRAM with Implanted Metal Ions

Atomic Layer Deposition of Ga2O3/ZnO Composite Films for High-Performance Forming-Free Resistive Switching Memory.

Resistive switching characteristics of sol-gel derived La2Zr2O7 thin film for RRAM applications