Abstract:The resistive switching memory effects in metal-insulator-metal devices with aluminium (Al) as top electrode (TE) and bottom electrode (BE). A solution processed active layer consisting of zinc oxide (ZnO) nanoparticles embedded in an insulating polyvinyl alcohol (PVA) matrix and polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) has been studied by using flexible polyethylene terephthalate (PET) substrates. The current-voltage (I-V) measurements of hybrid Al/ZnO-PVA/PEDOT:PSS/Al/flexible PET substrate device exhibited a non-volatile bistable resistive switching behaviour, which is attributed to the trapping, storage and transport of charges in the electronic states of the ZnO nanoparticles. The performance of hybrid device is significantly enhanced over control Al/PEDOT:PSS/Al and Al/ZnO-PVA/Al devices due the presence of PEDOT:PSS polymer. This PEDOT:PSS improves the performance of oxygen ions (holes) migration toward BE and protect back oxygen vacancies (electrons) migrate toward BE from ZnO-PVA composites which may reduces the leakage current, as a result, increased the 'ON state/OFF state' current ratio of 7.9 × 103 times. The fabricated hybrid device showed high ON/OFF switching current ratio larger than five orders of magnitude with low operating voltages. It is observed that, the existence of two conducting states, namely, low conductivity state (OFF state) and high conductivity state (ON state), exhibiting bistable behaviour. The state of the device was maintained even after removal of the applied bias, indicating the non-volatile memory. The observed current-time response showed good memory retention behaviour of the fabricated devices. The excellent stability and retention performances of hybrid device verify the reliability of this device and demonstrate their potential for application in non-volatile bistable memory device. The carrier transport mechanism of the bistable behaviour for the fabricated non-volatile organic bistable devices structures is described on the basis of the I-V experimental results by analyzing the effect of space charge and electronic structure. Interestingly, the device performance was not degraded and remains identical even after bending the device from 60-120° angles, which indicates high potential for flexible non-volatile bistable memory device applications. This demonstration provides a class of memory devices with the potential for future flexible electronics applications.

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Resistive switching in Nb-doped SrZrO3 memory films: An effective approach with a Cu modulation layer

Highly Flexible Non-Volatile Resistive Memory Devices Based on ZnO Nanoparticle/Graphene Heterostructures Embedded in Poly(methyl methacrylate)

From dead leaves to sustainable organic resistive switching memory

Resistive switching characteristics of thin NiO film based flexible nonvolatile memory devices

Flexible resistive switching bistable memory devices using ZnO nanoparticles embedded in polyvinyl alcohol (PVA) matrix and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)

Fully Room-Temperature-Fabricated Nonvolatile Resistive Memory for Ultrafast and High-Density Memory Application

Stable Resistive Switching in ZnO/PVA:MoS2 Bilayer Memristor

Stable Resistive Switching in ZnO/PVA:MoS<sub>2</sub> Bilayer Memristor

Transient and Biocompatible Resistive Switching Memory Based on Electrochemically‐Deposited Zinc Oxide

An All‐Inorganic, Transparent, Flexible, and Nonvolatile Resistive Memory

Influence of Metal Electrode on the Performance of ZnO Based Resistance Switching Memories

Effects of Piezoelectric Potential of ZnO on Resistive Switching Characteristics of Flexible ZnO/TiO2 Heterojunction Cells

Modulating Metallic Conductive Filaments Via Bilayer Oxides in Resistive Switching Memory

Tunable Resistive Switching Behaviors and Mechanism of the W/ZnO/ITO Memory Cell

Highly Flexible Resistive Switching Memory Based on the Electronic Switching Mechanism in the Al/TiO 2 /Al/Polyimide Structure.

Resistive Switching and Synaptic Behaviors of Tan/Al2o3/Zno/Ito Flexible Devices with Embedded Ag Nanoparticles

Flexible memristors with low-operation voltage and high bending stability based on Cu2AgBiI6 perovskite

In Situ Observation of Nickel As an Oxidizable Electrode Material for the Solid-Electrolyte-Based Resistive Random Access Memory

Improvement of resistive switching characteristics in ZrO2 film by embedding a thin TiOx layer.

Robust mica perovskite photoelectric resistive switching memory