Abstract:Cryogenic deep reactive ion etching (Cryo DRIE) of silicon has become an enticing but challenging process utilized in front-end fabrication for the semiconductor industry. This method, compared to the Bosch process, yields vertical etch profiles with smoother sidewalls not subjected to scalloping, which are desired for many microelectromechanical systems (MEMS) applications. Smoother sidewalls enhance electrical contact by ensuring more conformal and uniform sidewall coverage, thereby increasing the effective contact area without altering contact dimensions. The versatility of the Cryo DRIE process allows for customization of the etch profiles by adjusting key process parameters such as table temperature, O2 percentage of the total gas flow rate (O2 + SF6), RF bias power, and process pressure. In this work, we undertake a comprehensive study of the effects of Cryo DRIE process parameters on the trench profiles in the structures used to define cantilevers in MEMS devices. Experiments were performed with an Oxford PlasmaPro 100 Estrelas ICP-RIE system using positive photoresist SPR-955 as a mask material. Our findings demonstrate significant influences on the sidewall angle, etch rate, and trench shape due to these parameter modifications. Varying the table temperature between -80°C and -120°C under a constant process pressure of 10 mTorr changes the etch rate from 3 to 4 μm/min, while sidewall angle changes by ~2°, from positive ( 90° relative to the Si surface) tapering. Altering the O2 flow rate with constant SF6 flow results in a notable 10° shift in sidewall tapering. Furthermore, SPR-955 photoresist masks provide selectivity of 46:1 with respect to Si and facilitates the fabrication of MEMS devices with precise dimension control ranging from 1 to 100 μm for etching depths up to 42 μm using Cryo DRIE. Understanding the influence of each parameter is crucial for optimizing MEMS device fabrication.

A method to reduce notching effect on the anchors of a micro-gyroscope

A Bulk Micromachined Gyroscope With Improved Quality-Factors At Atmospheric Pressure

An Electrostatically-driven Capacitively-sensed Frame Microgyroscope Fabricated with an Improved Process Flow

Methods to Protect Silicon Microstructures from the Damages in Deep Reactive Ion Etching

Performance comparison of methods to evading notching effect for SOG structures in DRIE

Fabrication of SOI MEMS Inertial Sensors with Dry Releasing Process

A single-mask dry-release process for fabrication of high aspect ratio SOI MEMS devices

A Wafer-level Protective Technique Using Glass Caps for MEMS Gyroscopes

A Single Mask Dry Releasing Process for Making High Aspect Ratio Soimemsdevices.

A Dual-Purpose Method to Enhance Heat Transfer and Prevent Notching Effect in Deep Reactive Ion Etching

A lateral-axis MEMS tuning fork gyroscope with nozzle-optimized squeeze-film sensing element

A trimming method for MEMS gyroscopes by focused ion beam etching

Rapid-Thermal-Processing-Based Intrinsic Gettering For Nitrogen-Doped Czochralski Silicon

An improved method to remove anti-footing Al layer after DRIE

Reduced etch lag and high aspect ratios by deep reactive ion etching (DRIE)

Design, Fabrication and Characterization of Disk Resonator Gyroscope with Vibration and Shock Resistance

A novel electrostatic-driven tuning fork micromachined gyroscope with a bar structure operating at atmospheric pressure

Cryogenic DRIE Processes for High-Precision Silicon Etching in MEMS Applications

0.015 Degree-Per-Hour Honeycomb Disk Resonator Gyroscope

Improvement on the Uniformity of Deep Reactive Ion Etch for Electrically Isolated Silicon-Based Substrates

The Method of Prevent Footing Effect in Making SOI Micro-Mechanical Structure