Abstract:This paper proposed a novel slot-structure z-axis gyroscope with a positive or negative electrostatic spring. The slot-structure gyroscope has in-plane drive and sense modes. Different from conventional comb finger structure, variable-area fixed out-of-plane electrodes under the proof-mass are used to excite the in-plane vibratory modes. To overcome the disadvantage that the resonant frequencies are unable to be adjusted through variable-area capacitors in the conventional slot-structure gyroscope, a variable-area capacitor with triangular shape fixed electrodes is designed to introduce the electrostatic tuning of the in-plane vibratory modes. A voltage difference Vt across the triangular fixed electrodes and movable electrodes produces a positive or negative electrostatic spring. The induced electrostatic spring constant is proportional to Vt2. A prototype with a positive electrostatic spring is fabricated and tested. The difference of the nature frequencies of the drive mode and sense mode is about 13.5 Hz. A 15 V Vt makes the gyroscope perfect mode matching. The scale factor of the prototype is about 72 mV/°/s when Vt is 0 V and increases with Vt. It presents a scale factor of 320.6 mV/°/s and noise density of 11.63 °/h/vHz when mode matched. Interestingly, the bandwidth of the gyroscope only slightly decreased from the initial value of 7 Hz to 4.6 Hz when mode matched, possible reasons are discussed in this paper.

A novel electrostatic-driven tuning fork micromachined gyroscope with a bar structure operating at atmospheric pressure

A Bulk Micromachined Gyroscope With Improved Quality-Factors At Atmospheric Pressure

An Electrostatically-driven Capacitively-sensed Frame Microgyroscope Fabricated with an Improved Process Flow

A Slot-Structure MEMS Gyroscope Working at Atmosphere With Tunable Electrostatic Spring Constant

A Novel Silicon Micromachined Gyroscope With High Q At Atmosphere

A MICROMECHANICAL MODE-MATCHED GYROSCOPE USING STIFFNESS NONLINEARITY AND ELECTROSTATIC TUNING

Performance Characterization of a Bulk Micromachined Gyroscope Working at Atmosphere

A Novel Bulk Micromachined Gyroscope with Slots Structure Working at Atmosphere

An Electrically Decoupled Lateral-Axis Tuning Fork Gyroscope Operating at Atmospheric Pressure

Design and Fabrication of an Electrostatically Suspended Micromachined Gyroscope

A Lateral-Axis Microelectromechanical Tuning-Fork Gyroscope With Decoupled Comb Drive Operating at Atmospheric Pressure

Structure Design and Structural Parameter Optimization of Fully Symmetric Vibratory Gyroscope

A Novel X-Axis Tuning Fork Gyroscope with "8 Vertical Springs-Proofmass" Structure on (111)-Silicon

System Modelling of A Vibratory Micromachined Gyroscope with Bar Structure

Study Of A Novel Silicon Micromachined Gyroscope

A Lateral-Axis Micromachined Tuning Fork Gyroscope With Torsional Z-Sensing And Electrostatic Force-Balanced Driving

A Novel Microelectromechanical Resonant Gyroscope

A lateral-axis micromachined tuning fork gyroscope with novel driving and sensing combs

STUDY ON DYNAMIC CHARACTERISTIC OF A NOVEL SILICON MICROMACHINED GYROSCOPE

Design and simulation of a novel micromachined comb-gimbal gyroscope

A Bulk Micromachined Vibratory Lateral Gyroscope Fabricated With Wafer Bonding And Deep Trench Etching