Abstract:This paper proposed a novel slot-structure z-axis gyroscope with a positive or negative electrostatic spring. The slot-structure gyroscope has in-plane drive and sense modes. Different from conventional comb finger structure, variable-area fixed out-of-plane electrodes under the proof-mass are used to excite the in-plane vibratory modes. To overcome the disadvantage that the resonant frequencies are unable to be adjusted through variable-area capacitors in the conventional slot-structure gyroscope, a variable-area capacitor with triangular shape fixed electrodes is designed to introduce the electrostatic tuning of the in-plane vibratory modes. A voltage difference Vt across the triangular fixed electrodes and movable electrodes produces a positive or negative electrostatic spring. The induced electrostatic spring constant is proportional to Vt2. A prototype with a positive electrostatic spring is fabricated and tested. The difference of the nature frequencies of the drive mode and sense mode is about 13.5 Hz. A 15 V Vt makes the gyroscope perfect mode matching. The scale factor of the prototype is about 72 mV/°/s when Vt is 0 V and increases with Vt. It presents a scale factor of 320.6 mV/°/s and noise density of 11.63 °/h/vHz when mode matched. Interestingly, the bandwidth of the gyroscope only slightly decreased from the initial value of 7 Hz to 4.6 Hz when mode matched, possible reasons are discussed in this paper.

System Modelling of A Vibratory Micromachined Gyroscope with Bar Structure

Modeling and Simulation of Micromachined Gyroscope

A Bulk Micromachined Gyroscope With Improved Quality-Factors At Atmospheric Pressure

A MICROMECHANICAL MODE-MATCHED GYROSCOPE USING STIFFNESS NONLINEARITY AND ELECTROSTATIC TUNING

Effects of Structural Dimension Variation on the Vibration of MEMS Ring-Based Gyroscopes

A Slot-Structure MEMS Gyroscope Working at Atmosphere With Tunable Electrostatic Spring Constant

Performance Characterization of a Bulk Micromachined Gyroscope Working at Atmosphere

Structure Design and Structural Parameter Optimization of Fully Symmetric Vibratory Gyroscope

System-Level Simulation of Vibratory Micromachined Gyroscope with Fence Structure

System Modeling of a MEMS Vibratory Gyroscope and Integration to Circuit Simulation

A Novel Microelectromechanical Resonant Gyroscope

A novel electrostatic-driven tuning fork micromachined gyroscope with a bar structure operating at atmospheric pressure

Mixed Simulation of Micromachined Gyroscope's Sensor Model and Interfacing Circuits

Simulation Of Vibratory Micromachined Gyroscope With Fence Structure

Design of a Micro-Electro Mechanical System Quad Mass Gyroscope with Compliant Mechanical Amplification

The design and implementation of interface electronics for silicon micromechanical gyroscopes

A Novel Bulk Micromachined Gyroscope with Slots Structure Working at Atmosphere

A Decoupled Microelectromechanical Resonant Gyroscope

Simulation of characteristic of comb-gimbal micromachined gyroscope

Force Rebalance Controller Synthesis for A Micromachined Vibratory Gyroscope Based on Sensitivity Margin Specifications

A Novel Silicon Micromachined Gyroscope With High Q At Atmosphere